0

Chassis & Suspension

Does your car feel soft in corners, is there knocking from the front wheels over bumps, or does the steering wheel pull to one side after a modification? In this category we bring together parts for suspension, bushings and mounts, steering and chassis. They are for you if you want to restore worn handling, raise or lower your car, or build a project for the track or off-road.

What suspension, steering and chassis parts do

The running gear determines how the tyres keep contact with the road and how calmly the car reacts to bumps, braking and cornering. Among the suspension parts you will find, for example, ICON shock absorbers for Toyota Tundra, GM HD and Ford F-250/F-350, as well as coilover kits where spring and damper are combined in one unit. Bilstein and KYB are also among the brands in the category. Other parts affect geometry and stiffness, such as ICON's adjustable track bar, camber bolts for wheel alignment or the QA1 Transmission X-Brace, a cross brace at the transmission. See also steering and chassis parts.

How to choose suspension

Start with the car and how you use it. For a pickup or off-road vehicle, the lift is crucial: the ICON shocks, for example, are divided by lift such as 0-1.5 or 4.5 inches, and the wrong length can limit travel or put strain on the shock. For street cars and the track, it is more about damping, spring rate and adjustment. Weigh up several factors:

  • Use: daily driving, towing, off-road and track place different demands on comfort and control.
  • Ride height: a changed height may require a new wheel alignment, caster correction, e.g. with the Old Man Emu Caster Kit, or an adjustable track bar.
  • Adjustment: adjustable shocks allow fine-tuning, but it takes time to find the right setting.
  • The whole picture: new springs rarely give the desired result if the shocks or bushings are worn.

Bushings and mounts – material and fit

Bushings and mounts absorb movement between arms, axles and body. They are typically available in rubber or polyurethane. Polyurethane can give more precise steering, but can also transmit more vibration and noise. The category includes, for example, the Old Man Emu Bushing Kit and Rugged Ridge bushings for the track bar on the 1987-95 Jeep Wrangler YJ, and Superpro and Moog are also among the brands. Check model year, drivetrain and front or rear position, as many parts are specific. The ICON parts for F-250/F-350, for example, are divided by 4WD and lift.

Installation, wheel alignment and inspection

Suspension and steering parts directly affect safety, so installation requires the correct tools and the right tightening torques. Rubber bushings are often only fully tightened once the car is standing on its wheels at normal ride height. Have a wheel alignment carried out after the work. Whether the modification requires an inspection or approval depends on the product and the car. Therefore, check the documentation for the specific part number before you install.

Frequently asked questions

Should shock absorbers be replaced in pairs?

Shock absorbers are typically replaced in pairs on the same axle so that damping is equal on both sides. Uneven damping can cause the car to behave unevenly under braking and in corners.

When do polyurethane bushings make sense instead of rubber?

Polyurethane can be relevant if you prioritise precision and less movement in the arms, e.g. for the track or heavy loads. For pure comfort, rubber may be better, as polyurethane typically transmits more vibration and noise.

Does raising or lowering the car require an inspection?

It depends on the extent of the modification, the product and the car. Check the documentation for the specific part number and the applicable rules before you install. A changed ride height can also affect headlight alignment and wheel alignment.

What does a caster kit do?

A caster kit corrects the wheel's caster angle, which can change when the car is raised. Too little caster can result in unstable and light steering at higher speeds. The need depends on the car and how much it has been raised.

Chassis & Suspension
View as Grid List
Sort by
Display per page

UMI- Front Coilover Kit

umi6560-2
UMI Performance 15-24 Ford F-150 Coilover Adjustable Spring Lowering Kit - Front
1.311,20 € excl. VAT

UMI- Front Coilover Kit

umiA204-350R
UMI Performance 78-88 G-Body 82-03 S10/S15 73-77 A-Body Front Coilover Kit
1.148,07 € excl. VAT

UMI- Front Coilover Kit

umiA224-550R
UMI Performance 78-88 G-Body 82-03 S10/S15 73-77 A-Body Front Coilover Kit
1.176,86 € excl. VAT

UMI- Front Coilover Kit

umi3058-850
UMI Performance 78-88 GM G-Body 82-03 S10/S15 Front Kit Use w/ Coilover A-Arms
1.011,81 € excl. VAT

UMI- Front Coilover Kit

umiA224-450R
UMI Performance 78-88 G-Body 82-03 S10/S15 73-77 A-Body Front Coilover Kit
1.176,86 € excl. VAT

UMI- Front Double Adjustable

umiB215
UMI Performance 73-87 GM C10 Viking double adjustable shock Front
374,73 € excl. VAT

UMI- Front Spring

umi6452F
UMI Performance 73-87 GM C10 Front Lowering Springs 2in drop
281,82 € excl. VAT

UMI- Front Sway Bar

umi3635-B
UMI Performance 78-96 GM B-Body Tubular Front Sway Bar - Black
504,53 € excl. VAT

UMI- Front Sway Bar

umi1012-B
UMI Performance 05-14 Ford Mustang Front Sway Bar 35mm Tubular Adjustable
424,13 € excl. VAT

UMI- Front Sway Bar

umi1012-R
UMI Performance 05-14 Ford Mustang Front Sway Bar 35mm Tubular Adjustable
424,13 € excl. VAT

UMI- Front Sway Bar

umi6581-R
UMI Performance 21-24 Ford F-150 1 3/8in Solid Front Sway Bar - Red
535,71 € excl. VAT

UMI- Front Sway Bar

umi3635-R
UMI Performance 78-96 GM B-Body Tubular Front Sway Bar - Red
504,53 € excl. VAT

UMI- Front Sway Bar

umi6579-B
UMI Performance 15-20 Ford F-150 1 1/2in Solid Front Sway Bar - Black
594,86 € excl. VAT

UMI- Front Sway Bar

umi2112-B
UMI Performance 93-02 GM F-Body Front Sway Bar 35mm Tubular
473,93 € excl. VAT

UMI- Front Sway Bar

umi6579-R
UMI Performance 15-20 Ford F-150 1 1/2in Solid Front Sway Bar - Red
594,82 € excl. VAT

UMI- Front Sway Bar, Black

umi3833-R
UMI Performance 82-03 S10/S15 Front Sway Bar 1-1/4in Solid
442,11 € excl. VAT

UMI- Front Sway Bar, Black

umi4035-B
UMI Performance 64-72 GM A-Body 1-1/4in Solid Front Sway Bar - Black
511,15 € excl. VAT

UMI- Front Sway Bar, Black

umi2117-B
UMI Performance 82-92 GM F-Body Front Sway Bar 35mm
633,16 € excl. VAT

UMI- Front Sway Bar, Red

umi3833-B
UMI Performance 82-03 S10/S15 Front Sway Bar 1-1/4in Solid
445,13 € excl. VAT

UMI- Front Sway Bar, Splined

umi2680-B
UMI Performance 1-1/4in Splined Front Sway Bar (Double Shear End Links)
1.355,32 € excl. VAT

UMI- Front Swaybar

umi6440-R
UMI Performance 73-87 GM C10 Front Sway Bar 1-3/8in tubular
452,30 € excl. VAT

UMI- Front Swaybar

umi6440-B
UMI Performance 73-87 GM C10 Front Sway Bar 1-3/8in tubular
452,30 € excl. VAT

UMI- G-body/S10 Adjustable Upper A-Arm

umi3056-3-B
UMI Performance 78-88 G-Body S10 Tubular Front Upper A-Arms Adjustable
899,38 € excl. VAT

UMI- G-body/S10 Adjustable Upper A-Arm

umi3056-3-R
UMI Performance 78-88 G-Body S10 Tubular Front Upper A-Arms Adjustable
899,38 € excl. VAT