0

Pipes, Flanges and Downpipes

Missing a section of pipe, a bend or a flange to make your exhaust fit? In this category we bring together pipes, bends, flanges, downpipes, flex pipes and adapters for you who build or repair an exhaust yourself or adapt an existing system to a new project.

What each part does

Straight pipes and exhaust tubing in lengths form the actual pipe routing, while exhaust bends guide it around the underbody, axle and tank. Flanges and adapters join parts with different diameters or connection types, and a flex pipe absorbs engine movement so joints and hangers are typically put under less stress. Turndown tailpipes direct the gas down under the car. Downpipes connect the turbo to the rest of the exhaust; the range includes, for example, downpipes from Diamond Eye Performance with a direct turbo flange and V-band clamp. Other brands in the category include Magnaflow, Stainless Bros, Stainless Works and Remus.

How to choose pipes, flanges and downpipes

  • Diameter: The pipe diameter should suit the engine's power and the rest of the system. A bigger pipe is not automatically better – it depends on the project and can change both sound and gas flow.
  • Material: Stainless steel typically resists corrosion better, while mild or coated steel can be easier to work with. Some downpipes are available in several material versions.
  • Connection type: Flanges, V-bands and clamps must match each other and the space you have for installation.
  • Fitment: Downpipes and connecting pipes are often made for specific engines or turbo types, so check the part number against your car.

Installation, inspection and maintenance

Measure and test-fit before you weld or do the final tightening, and use new gaskets on flange joints. A flex pipe should not be used to correct misaligned pipes, as this can wear the braiding. Pipes close to fuel lines or brake lines may need a heat shield. Whether the modification can be approved for roadworthiness inspection depends on the product and the car – this applies especially to downpipes without a catalytic converter – so check the E-mark and requirements for the specific part number. Re-tighten the joints after the first few drives and keep an eye out for leaks at the flanges.

Frequently asked questions

What is the difference between a downpipe with and without a catalytic converter?

A downpipe with a catalytic converter cleans the exhaust gas, while one without typically gives less back pressure but often cannot be approved for road use. Whether a specific downpipe can pass inspection depends on the product and the car, so check the part number.

Where should the flex pipe be placed in the exhaust?

The flex pipe is typically placed close to the engine or turbo, where movement is greatest. The exact position depends on the system, and the pipe must be installed straight and without twisting to last.

Can I join pipes with different diameters?

Yes, with an adapter or a reducer you can join pipes of different sizes. Measure both the inside and outside diameter so the transition fits tightly, and choose a connection type that suits the rest of the system.

View as Grid List
Sort by
Display per page

Stainless Works, Pair of Header Flanges

sswHF463V163
Stainless Works Small Block Ford 4.6L 3V Round Port Header 304SS Exhaust Flanges 1-5/8in Primaries
222,89 € excl. VAT

Stainless Works, Pair of Header Flanges

sswHFBBC225
Stainless Works Big Block Chevy Round Port Header 304SS Exhaust Flanges 2-1/4in Primaries
226,88 € excl. VAT

Stainless Works, Pair of Header Flanges

sswHFLS1188
Stainless Works Chevrolet LS1/LS6 Round Port Header 304SS Exhaust Flanges 1-7/8in Primaries
222,89 € excl. VAT

Stainless Works, Pair of Header Flanges

sswHF462V163
Stainless Works Small Block Ford 4.6L 2V Round Port Header 304SS Exhaust Flanges 1-5/8in Primaries
222,89 € excl. VAT

Stainless Works, Pair of Header Flanges

sswHFBBCH250RSD
Stainless Works BBC Round Port 304SS Exhaust Flanges 2-1/2in Primaries (Raised Port Heads Only)
229,47 € excl. VAT

Stainless Works, Pair of Header Flanges

sswHFSBCSQ1875
Stainless Works Small Block Chevy Squared Oval Port Header 304SS Exhaust Flanges 1-7/8in Primaries
224,30 € excl. VAT

Stainless Works, Pair of Header Flanges

sswHFFORD5.0200
Stainless Works Ford 5.2L/5.0L Coyote Round Port Shaped Header 304SS Exhaust Flanges 2in Primaries
225,24 € excl. VAT

Stainless Works, Pair of Header Flanges

sswHFSBFVICT200
Stainless Works SBF Victor Senior Heads Square Port Header 304SS Exhaust Flanges 2in Primaries
222,89 € excl. VAT

Stainless Works, Pair of Header Flanges

sswHFSBFTFHP188
Stainless Works Small Block Ford Trick Flow High Port Header 304SS Exhaust Flanges 1-7/8in Primaries
222,89 € excl. VAT

Stainless Works, Pair of Header Flanges

sswHFLS1200
Stainless Works Chevrolet LS1/LS6 Round Port Header 304SS Exhaust Flanges 2in Primaries
222,89 € excl. VAT

Stainless Works, Pair of Header Flanges

sswHFLT1_188
Stainless Works 2014+ Chevrolet LT1/LT4 Port Matched Header 304SS Exhaust Flanges 1-7/8in Primaries
222,89 € excl. VAT

Stainless Works, Pair of Header Flanges

sswHFLS1175
Stainless Works Chevrolet LS1/LS6 Round Port Header 304SS Exhaust Flanges 1-3/4in Primaries
222,89 € excl. VAT

Stainless Works, Pair of Header Flanges

sswHFMOP35V6163
Stainless Works Mopar 3.5L V6 Flat Oval Port Header 304SS Exhaust Flanges 1-5/8in Primaries
220,54 € excl. VAT

Stainless Works, Pair of Header Flanges

sswHFBBC175
Stainless Works Big Block Chevy Round Port Header 304SS Exhaust Flanges 1-3/4in Primaries
224,30 € excl. VAT

Stainless Works, Pair of Header Flanges

sswHFLT5
Stainless Works Chevrolet LT5 Flat Rectangular Port Header 304SS Exhaust Flanges 2in Primaries
225,24 € excl. VAT

Stainless Works, Pair of Header Flanges

sswHF4.6
Stainless Works 03-04 Ford Cobra 4.6L 32V Wide Oval Header 304SS Exhaust Flanges 1-3/4in Primaries
222,89 € excl. VAT

Stainless Works, Pair of Header Flanges

sswHFJP61200
Stainless Works Hemi 5.7L/6.1L/6.4L D-Port Shaped Header 304SS Exhaust Flanges 2in Primaries
225,24 € excl. VAT

Stainless Works, Pair of Header Flanges

sswHFSBCSQ175
Stainless Works Small Block Chevy Squared Oval Port Header 304SS Exhaust Flanges 1-3/4in Primaries
224,30 € excl. VAT

Stainless Works, Tubing 1ft Section

ssw3.5SS-1
Stainless Works Tubing Straight 3-1/2in Diameter .065 Wall 1ft
57,06 € excl. VAT

Stainless Works, Tubing 1ft Section

ssw2.1SS-1
Stainless Works Tubing Straight 2-1/8in Diameter .065 Wall 1ft
38,00 € excl. VAT

Stainless Works, Tubing 1ft Section

ssw2.5SS-1
Stainless Works Tubing Straight 2-1/2in Diameter .049 Wall 1ft
38,00 € excl. VAT

Stainless Works, Tubing 1ft Section

ssw4SS-1
Stainless Works Tubing Straight 4in Diameter .065 Wall 1ft
57,55 € excl. VAT

Stainless Works, Tubing 1ft Section

ssw1.8SS-1
Stainless Works Tubing Straight 1-7/8in Diameter .065 Wall 1ft
32,34 € excl. VAT

Stainless Works, Tubing 1ft Section

ssw4.5SS-1
Stainless Works Tubing Straight 4.5in Diameter .065 Wall 1ft
87,15 € excl. VAT