Outdoor & Recreation

Are your wheels stuck in sand, snow or mud, or do your motorcycle's handlebars and grips need an upgrade? In this main category we bring together gear for leisure off the tarmac: ATV, motorcycle and snowmobile accessories, bicycle accessories, traction mats, plus tents, tarps and shelters. It's for you if you drive off-road or head out on trips.

Handlebars, levers and parts for motorcycle, ATV and snowmobile

Under ATV, motorcycle and snowmobile accessories you'll find parts that change riding position, controls and comfort. This can be, for example, a complete handlebar kit such as the Burly Brand Control Kit with a 14-inch T-bar, the Cycra Probend Bar Pack, a Brembo lever for the master cylinder or BikeMaster heated grips with an LCD switch. For the suspension there is, for example, XTrig shock preload adjustment, plus small parts such as cable holders and brake bolts with clips. In the category you'll also find brands such as Renthal, Kuryakyn and Mustang Motorcycle.

How to choose handlebar and control parts

Fitment is determined by dimensions, not by looks. Check in particular:

• Handlebar diameter: grips and levers must fit the handlebar, e.g. 7/8 inch.
• Height and width: a taller handlebar, such as a 14-inch T-bar, can require longer cables, wiring and brake lines.
• Thread and side: parts such as the XTrig adjuster are available for specific threads, e.g. M52 x 1.5, and in right- or left-hand versions.
• Power: heated grips put load on the electrical system, so check that the vehicle can supply the required power.

Brake parts such as levers and bolts should be fitted according to the manufacturer's instructions and checked before riding. Whether changes to handlebars or controls require an inspection or approval depends on the product and vehicle, so check this for the specific part number.

Traction mats for sand, snow and mud

Traction mats are placed in front of the driven wheels so the tyres can regain grip when the vehicle is stuck. The category includes, for example, ARB Tred Pro in several colours. Choose by length and weight relative to your vehicle and storage space, and consider how the mats will be secured while driving. Use low speed and steady throttle, as wheelspin can wear the mats, and rinse off sand, salt and mud after use.

Bicycle accessories, tents and shelters

For the trip itself there are bicycle accessories as well as tents, tarps and shelters. Choose based on how the gear will be used: weight and pack size matter a lot when it has to go on a bicycle or motorcycle, while waterproofing, ventilation and pitching time typically determine how well a tent or tarp performs in Danish weather. Also check dimensions and fastening so the gear suits the car, bicycle or campsite it will be used with.

Frequently asked questions

How do I use traction mats correctly?

Dig away sand or snow in front of the driven wheels, push the mats in under the tyres and drive slowly onto them with steady throttle. Heavy wheelspin can wear the mats and dig the vehicle in deeper.

Do cables and lines need replacing when I fit a taller handlebar?

That depends on the height difference and the vehicle. A taller handlebar, e.g. a 14-inch T-bar, can require a longer throttle cable, clutch cable, wiring and brake lines. Check that nothing pulls tight at full steering lock.

Does a new handlebar or new levers require an inspection?

That depends on the product and vehicle. Check the requirements and any approval for the specific part number, and have brake parts fitted and inspected by someone experienced with brake systems.

What should I check before fitting heated grips?

Check the handlebar diameter, e.g. 7/8 inch, and whether the vehicle's electrical system can supply the power. Position the switch so it can be operated safely, and route the wiring so it isn't pinched at steering lock.