0

Pipes, Flanges and Downpipes

Missing a section of pipe, a bend or a flange to make your exhaust fit? In this category we bring together pipes, bends, flanges, downpipes, flex pipes and adapters for you who build or repair an exhaust yourself or adapt an existing system to a new project.

What each part does

Straight pipes and exhaust tubing in lengths form the actual pipe routing, while exhaust bends guide it around the underbody, axle and tank. Flanges and adapters join parts with different diameters or connection types, and a flex pipe absorbs engine movement so joints and hangers are typically put under less stress. Turndown tailpipes direct the gas down under the car. Downpipes connect the turbo to the rest of the exhaust; the range includes, for example, downpipes from Diamond Eye Performance with a direct turbo flange and V-band clamp. Other brands in the category include Magnaflow, Stainless Bros, Stainless Works and Remus.

How to choose pipes, flanges and downpipes

  • Diameter: The pipe diameter should suit the engine's power and the rest of the system. A bigger pipe is not automatically better – it depends on the project and can change both sound and gas flow.
  • Material: Stainless steel typically resists corrosion better, while mild or coated steel can be easier to work with. Some downpipes are available in several material versions.
  • Connection type: Flanges, V-bands and clamps must match each other and the space you have for installation.
  • Fitment: Downpipes and connecting pipes are often made for specific engines or turbo types, so check the part number against your car.

Installation, inspection and maintenance

Measure and test-fit before you weld or do the final tightening, and use new gaskets on flange joints. A flex pipe should not be used to correct misaligned pipes, as this can wear the braiding. Pipes close to fuel lines or brake lines may need a heat shield. Whether the modification can be approved for roadworthiness inspection depends on the product and the car – this applies especially to downpipes without a catalytic converter – so check the E-mark and requirements for the specific part number. Re-tighten the joints after the first few drives and keep an eye out for leaks at the flanges.

Frequently asked questions

What is the difference between a downpipe with and without a catalytic converter?

A downpipe with a catalytic converter cleans the exhaust gas, while one without typically gives less back pressure but often cannot be approved for road use. Whether a specific downpipe can pass inspection depends on the product and the car, so check the part number.

Where should the flex pipe be placed in the exhaust?

The flex pipe is typically placed close to the engine or turbo, where movement is greatest. The exact position depends on the system, and the pipe must be installed straight and without twisting to last.

Can I join pipes with different diameters?

Yes, with an adapter or a reducer you can join pipes of different sizes. Measure both the inside and outside diameter so the transition fits tightly, and choose a connection type that suits the rest of the system.

View as Grid List
Sort by
Display per page

4" AL 1ST SECTION TP

dep221076
Diamond Eye TAILP 4in 1ST SEC TB DUAL PASS SIDE FOR OFF-RD KITS AL CUMMINS 5 9L 2500/3500 04 5-07.5
198,98 € excl. VAT

4" AL 1ST SECTION TP

dep332007
Diamond Eye TAILP 4in DRVS SIDE 1ST SEC AL 2006-2007.5 CHEVY/GMC 6.6L 2500/3500 UPDATED FROM #332003
212,62 € excl. VAT

4" AL 1ST SECTION TP

dep125040
Diamond Eye Tail Pipe 4in 1ST SEC TURBO/DPF/DWNP-BACK SGL AL 6 4L F250/F350 08-13 CORS SS 165040
233,24 € excl. VAT

4" AL 1ST SECTION TP

dep221064
Diamond Eye Tail Pipe 4in 1ST SEC TURBO/CB DUAL DRVS SIDE AL DODGE 5.9L 2500/3500 03-07
219,14 € excl. VAT

4" AL 1ST SECTION TP

dep221078
Diamond Eye TAILP 4in 1ST SEC TB DUAL DRVS SIDE FOR OFF-RD KITS AL CUMMINS 5 9L 2500/3500 04 5-07.5
221,33 € excl. VAT

4" AL 1ST SECTION TP

dep123001
Diamond Eye Tail Pipe 4in 1ST SEC ALUMUNIZED FORD EXCURSION 7.3L F450 99-03
134,86 € excl. VAT

4" AL 1ST SECTION TP

dep122025
Diamond Eye Tail Pipe 4in 1ST SEC DUAL PASSENGERS SIDE AL 7 3L F250/350 94-03 6 0L 03-07 5 9L
121,36 € excl. VAT

4" AL 1ST SECTION TP

dep341010
Diamond Eye TAILP 4in 1ST SEC DPF (DPF) BACK SGL AL: 2007.5-2008 CHEVY/GMC 6.6L 2500/3500 FOR K4130A
277,47 € excl. VAT

4" AL 2ND SECTION TP

dep122026
Diamond Eye TAILP 4in 2ND SEC DUAL DRIVERS S AL 7 3L F250/350 94-03 6 0L 03-07 5 9L 2500/3500 94-07
212,62 € excl. VAT

4" AL 2ND SECTION TP

dep332008
Diamond Eye Tail Pipe 4in DRVS SIDE 2ND SEC AL 01-07.5 CHEVY/GMC 6.6L 2500/3500 UPDATED FROM #332004
191,87 € excl. VAT

4" AL 2ND SECTION TP

dep121051
Diamond Eye Tail Pipe 4in 2ND SEC TB SGL AL FORD 7.3L F250/350 CAB & CHASSIS 99-03
178,67 € excl. VAT

4" AL 2ND SECTION TP

dep221079
Diamond Eye Tail Pipe 4in 2ND SEC TB DUAL DRVS SIDE W HNGR FOR OFF-RD KITS AL CUMMINS 5 9L
235,00 € excl. VAT

4" AL 2ND SECTION TP

dep125041
Diamond Eye Tail Pipe 4in 2ND SEC TURBO/DPF/DWNP-BACK SGL AL 6 4L F250/F350 08-13 CORS SS 165041
165,39 € excl. VAT

4" AL 2ND SECTION TP

dep220097
Diamond Eye Tail Pipe 4in 2ND SEC TB SGL AL DODGE 5.9L 2500/3500 89-93 2X4 ONLY
188,26 € excl. VAT

4" AL 2ND SECTION TP

dep321052
Diamond Eye 01-07.5 Silverado/Sierra 2500/3500 Second Section Pass Steel 4in. Tail Pipe
169,27 € excl. VAT

4" AL 2ND SECTION TP

dep124004
Diamond Eye Tail Pipe 4in 2ND SEC SEC TB SGL AL FORD 7.3L E-SERIES VAN 98-03
191,22 € excl. VAT

4" AL 2ND SECTION TP

dep122027
Diamond Eye Tail Pipe 4in 2ND SEC TURBO/CB DL PASS&DRV SIDE AL 7 3L F250/350 94-03 6 0L 03-07 5 9L
191,89 € excl. VAT

4" AL 2ND SECTION TP

dep341011
Diamond Eye TAILP 4in 2ND SEC DPF (DPF) BACK SGL AL: 2007.5-2010 CHEVY/GMC 6.6L 2500/3500 FOR K4130A
301,58 € excl. VAT

4" AL 2ND SECTION TP

dep220103
Diamond Eye Tail Pipe 4in 2ND SEC TB SGL AL DODGE 5.9L 2500/3500 89-93 4X4 ONLY
181,81 € excl. VAT

4" AL 2ND SECTION TP

dep221077
Diamond Eye Tail Pipe 4in 2ND SEC TB DUAL PASS SIDE W HNGRS FOR OFF-RD KITS AL CUMMINS 5 9L 2500
198,04 € excl. VAT

4" SS 1ST SECTION TP

dep162026
Diamond Eye Tail Pipe 4in 1ST SEC SS 94-02 DODGE 5.9L & 94-03 FORD 7.3L F250/F350
249,06 € excl. VAT

4" SS 1ST SECTION TP

dep261076
Diamond Eye TAILP 4in 1ST SEC TB DUAL PASS SIDE FOR OFF-RD KITS SS CUMMINS 5 9L 2500/3500 04 5-07.5
274,78 € excl. VAT

4" SS 1ST SECTION TP

dep261064
Diamond Eye Tail Pipe 4in 1ST SEC DRVS SIDE DUAL: SS: 03-04.5 DODGE
244,47 € excl. VAT

4" SS 1ST SECTION TP

dep261007
Diamond Eye TP1 4in AL DDG 07.5-12 Dodge 5.9L Cummins 2500/3500
255,20 € excl. VAT