0

Pipes, Flanges and Downpipes

Missing a section of pipe, a bend or a flange to make your exhaust fit? In this category we bring together pipes, bends, flanges, downpipes, flex pipes and adapters for you who build or repair an exhaust yourself or adapt an existing system to a new project.

What each part does

Straight pipes and exhaust tubing in lengths form the actual pipe routing, while exhaust bends guide it around the underbody, axle and tank. Flanges and adapters join parts with different diameters or connection types, and a flex pipe absorbs engine movement so joints and hangers are typically put under less stress. Turndown tailpipes direct the gas down under the car. Downpipes connect the turbo to the rest of the exhaust; the range includes, for example, downpipes from Diamond Eye Performance with a direct turbo flange and V-band clamp. Other brands in the category include Magnaflow, Stainless Bros, Stainless Works and Remus.

How to choose pipes, flanges and downpipes

  • Diameter: The pipe diameter should suit the engine's power and the rest of the system. A bigger pipe is not automatically better – it depends on the project and can change both sound and gas flow.
  • Material: Stainless steel typically resists corrosion better, while mild or coated steel can be easier to work with. Some downpipes are available in several material versions.
  • Connection type: Flanges, V-bands and clamps must match each other and the space you have for installation.
  • Fitment: Downpipes and connecting pipes are often made for specific engines or turbo types, so check the part number against your car.

Installation, inspection and maintenance

Measure and test-fit before you weld or do the final tightening, and use new gaskets on flange joints. A flex pipe should not be used to correct misaligned pipes, as this can wear the braiding. Pipes close to fuel lines or brake lines may need a heat shield. Whether the modification can be approved for roadworthiness inspection depends on the product and the car – this applies especially to downpipes without a catalytic converter – so check the E-mark and requirements for the specific part number. Re-tighten the joints after the first few drives and keep an eye out for leaks at the flanges.

Frequently asked questions

What is the difference between a downpipe with and without a catalytic converter?

A downpipe with a catalytic converter cleans the exhaust gas, while one without typically gives less back pressure but often cannot be approved for road use. Whether a specific downpipe can pass inspection depends on the product and the car, so check the part number.

Where should the flex pipe be placed in the exhaust?

The flex pipe is typically placed close to the engine or turbo, where movement is greatest. The exact position depends on the system, and the pipe must be installed straight and without twisting to last.

Can I join pipes with different diameters?

Yes, with an adapter or a reducer you can join pipes of different sizes. Measure both the inside and outside diameter so the transition fits tightly, and choose a connection type that suits the rest of the system.

View as Grid List
Sort by
Display per page

4" SS 1ST SECTION TP

dep362005
Diamond Eye TP1 4in PASS SIDE Catback DUAL SS: 01-07.5 CHEVY 6.6L 2500/3500
233,32 € excl. VAT

4" SS 1ST SECTION TP

dep361051
Diamond Eye Tail Pipe 4in 1ST SEC SS: 01-07.5 CHEVY 6.6L 2500/3500 CHV05TP-1-SS
192,17 € excl. VAT

4" SS 1ST SECTION TP

dep162025
Diamond Eye Tail Pipe 4in 1ST SEC PASS SIDE DUAL SS 94-07 CUMMINS 600 & 5 9L & 94-07.5 6 0L & 7 3L
192,17 € excl. VAT

4" SS 1ST SECTION TP

dep362007
Diamond Eye TP1 4in DRVS SIDE Catback DUAL SS: 01-07.5 CHEVY 6.6L 2500/3500
292,30 € excl. VAT

4" SS 1ST SECTION TP

dep361010
Diamond Eye TAIL PIPE 4in CHEVY 1ST SEC SS
300,05 € excl. VAT

4" SS 1ST SECTION TP

dep261078
Diamond Eye TAILP 4in 1ST SEC TB DUAL DRVS SIDE FOR OFF-RD KITS SS CUMMINS 5 9L 2500/3500 04 5-07.5
315,36 € excl. VAT

4" SS 2ND SECTION TP

dep362008
Diamond Eye TP2 4in DRVS SIDE Catback DUAL SS: 01-07.5 CHEVY 6.6L 2500/3500
226,02 € excl. VAT

4" SS 2ND SECTION TP

dep261077
Diamond Eye Tail Pipe 4in 2ND SEC TB DUAL PASS SIDE W HNGRS FOR OFF-RD KITS SS CUMMINS 5 9L 2500
286,27 € excl. VAT

4" SS 2ND SECTION TP

dep361011
Diamond Eye TAIL PIPE 4in CHEVY 2ND SEC SS
300,57 € excl. VAT

4" SS 2ND SECTION TP

dep161061
Diamond Eye Tail Pipe 4in 2ND SECT SS FORD ROLLOVER (123002-BUMPED) 99-03 7.3L F550 MAKE ON DEMAND
197,73 € excl. VAT

4" SS 2ND SECTION TP

dep162027
Diamond Eye Tail Pipe 4in 2ND SEC TURBO/CB DUAL PASS & DRV SIDE SS 7 3L F250/350 94-03 6 0L
219,50 € excl. VAT

4" SS 2ND SECTION TP

dep261079
Diamond Eye Tail Pipe 4in 2ND SEC TB DUAL DRVS SIDE W HNGR FOR OFF-RD KITS SS CUMMINS 5 9L
309,39 € excl. VAT

4" SS 2ND SECTION TP

dep361052
Diamond Eye Tail Pipe 4in 2ND SEC SS: 01-07.5 CHEVY 6.6L 2500/3500 CHV05TP-2-SS
208,55 € excl. VAT

4" SS 2ND SECTION TP

dep165041
Diamond Eye Tail Pipe 4in 2ND SEC TURBO/DPF/DWNP-BACK SGL SS 6 4L F250/F350 08-13 CORS AL 125041
317,76 € excl. VAT

4" SS 4 BOLT ADAPTER

dep361045
Diamond Eye 4 BOLT ADAPTER..SS CHV-FBA-SS
143,05 € excl. VAT

4" STAINLESS Y-PIPE

dep420065
Diamond Eye Tubing 4in SS Y PIPE DIA400Y-SS
199,81 € excl. VAT

4" X 24" ALUMINIZED STRAIGHT

dep400024
Diamond Eye Tubing 4inX24in AL DIAIP24
92,46 € excl. VAT

4" X 24" STAINLESS STRAIGHT

dep420024
Diamond Eye Tubing 4inX24in SS4in DIAIP24-SS
114,01 € excl. VAT

4" X 36" ALUMINIZED STRAIGHT

dep400036
Diamond Eye Tubing 4inX36in W/BUMP AL DIAIP36
143,00 € excl. VAT

4" X 36" STAINLESS STRAIGHT

dep420036
Diamond Eye Tubing 4inX36in W/BUMP SS DIAIP36-SS
160,66 € excl. VAT

4" X 48" ALUMINIZED STRAIGHT

dep400048
Diamond Eye Tubing 4inX48in W/BUMP AL DIAIP48
148,08 € excl. VAT

4" X 48" STAINLESS STRAIGHT

dep420048
Diamond Eye Tubing 4inX48in SS DIAIP48-SS
220,33 € excl. VAT

5" AL 2ND SECTION TP

dep125061
Diamond Eye 2008 FORD 5in Tail Pipe 2ND SECT W/HANGERS
245,42 € excl. VAT

5" AL 2ND SECTION TP

dep341007
Diamond Eye Tail Pipe 5in AL 2ND SEC CHEVY
141,40 € excl. VAT