A/C Condensers
Has the condenser in front of the radiator been hit by stone chips, corrosion or a leak, so the air conditioning no longer cools like it used to? This category brings together A/C condensers from CSF for a range of car models, so you can find a replacement that matches your model year and engine.
What does an A/C condenser do?
The condenser is part of your car's air conditioning and is typically located in front of the radiator. It releases heat from the refrigerant so it changes from gas to liquid before being sent on through the system. Its position at the very front exposes it to stone chips, road salt and dirt. Bent or clogged fins can reduce cooling performance, and corrosion can cause leaks so the refrigerant slowly escapes.
How to choose the right condenser
The product names of our condensers from CSF state model year, model and engine, e.g. Ford Explorer 3.5L, BMW 335i 3.0L Turbo or Kia Optima 2.4L. In particular, check:
- that the model year and engine variant match your car exactly
- the type and position of the connections as well as the brackets
- the refrigerant type, which depends on the car
- whether a receiver drier is built in – this depends on the product
Installation and maintenance
Before replacement, the refrigerant must be recovered from the system, and afterwards the system must be vacuumed and recharged – typically by a workshop certified to handle refrigerants. Many workshops also recommend replacing the receiver drier whenever the system has been opened. Rinse the fins gently with water and keep pressure washers at a distance. If the fault is caused by something other than the condenser, you will find other air conditioning components in the parent category.
Frequently asked questions
How can I tell if the condenser is faulty?
Typical signs are that the air becomes less cold, especially in slow traffic, visible damage or oily residue on the fins, or that the system repeatedly loses refrigerant. A workshop can perform a leak test and confirm the cause.
Can I replace the A/C condenser myself?
The installation itself can often be done with ordinary tools, but the refrigerant must be recovered, and the system must then be vacuumed and recharged. This requires equipment and certification, so that part should typically be handled by a workshop.
Does compressor oil need to be added when the condenser is replaced?
Often, yes. The old condenser contains oil, and that amount typically needs to be replaced. The correct oil type and quantity depend on the car and are usually stated in the car's specifications or the workshop's data.