Exhaust Manifolds
A ticking noise on cold start or an exhaust smell in the cabin can be caused by a cracked exhaust manifold or a leaking gasket. Here we bring together manifolds and manifold kits for e.g. Jeep, Willys, Dodge Ram and Ford F-150 – for you who need to replace a faulty part or renew the exhaust on your project.
What an exhaust manifold does
The exhaust manifold collects the exhaust gas from the cylinders and routes it on to the rest of the exhaust system. It works under large temperature swings, and over time this can lead to cracks, warped flanges or leaking joints. Under cast exhaust manifolds you will find e.g. cast manifolds from BD Diesel, while OMIX offers both individual manifolds and complete manifold kits. You can find more types under manifolds.
How to choose the right manifold
Fitment depends on several factors, so check the part number against your vehicle on these points:
- Engine and model year: e.g. 5.7L Hemi in Dodge Ram, 3.5L Ecoboost in Ford F-150 or 6.6L Duramax in Chevrolet/GMC 2500HD/3500HD.
- Side: V engines typically have one manifold on each side, and several products are sold separately for the driver or passenger side.
- Kit or single part: a kit can contain more than the manifold itself – check the product description to see what is included.
- Flange and connection: the flange must match both the cylinder head and the downstream pipe.
Installation and maintenance
Old bolts and studs are often seized after many heat cycles and can snap during removal, so plan for that. Use new gaskets, clean the mating surfaces and tighten the bolts evenly to the vehicle's specification. If a flange needs to be repaired or adapted, you will find parts under manifold flanges. You can also see all products from BD Diesel and OMIX.
Frequently asked questions
How can I tell if the exhaust manifold is cracked?
Typical signs are a ticking noise that is often most noticeable on cold start, soot around the flange or an exhaust smell. A crack can be hard to see, so it may be necessary to remove and inspect the manifold.
Do I need to replace both sides on a V engine?
It is not always necessary, and several manifolds are sold for one side. However, if both sides are the same age and equally worn, it can be worth inspecting the other side while the exhaust is apart anyway.
Does a new exhaust manifold need to be approved for inspection?
It depends on the product and the vehicle. A manifold equivalent to the original typically does not change the vehicle's approval, but always check the specific part number and any requirements for emission-related parts before installing.