0

EVAP Purge Valves

Is your check engine light on, or does the engine idle roughly right after refuelling? The cause may be the purge valve in your car's EVAP system, which controls when fuel vapours from the charcoal canister are routed into the engine. Here we collect replacement solenoid valves so you can find the one that fits your car and engine.

What does an EVAP purge valve do?

The fuel tank gives off vapours, which the EVAP system collects in a charcoal canister instead of releasing them into the air. The purge valve – an electrically controlled solenoid valve – opens when the engine management system requests it, so the vapours are drawn into the intake and burned. If the valve sticks open, it can cause rough idling or hard starting after refuelling. If it does not open, or the system leaks, the engine management typically registers a fault code and turns on the check engine light. The valve is part of the car's overall air and fuel delivery system.

How to choose the right valve

Purge valves are vehicle-specific, so the choice depends first and foremost on car model, model year and engine. Also check:

  • Number of hose ports – e.g. 1, 2 or 3 connections, which must match the original valve.
  • Connector and mounting – the electrical connector and bracket must fit the car's wiring harness and location.
  • Part number – it's a good idea to compare with the number on the valve you remove.

The valves from Gates list car model and engine in the product name, e.g. Volkswagen CC 2.0L, BMW 325I 2.5L and Toyota Corolla 1.8L.

Installation and troubleshooting

The valve is typically located in the engine bay with hoses to the charcoal canister and the intake manifold. Note the position of the hoses before removal, and replace brittle or cracked hoses at the same time, as leaks can trigger the same fault code as a faulty valve. Clear the fault codes after installation and check that the check engine light does not come back. If the car also has problems with fuel pressure or air-fuel ratio, it may be worth looking at fuel pumps and pressure regulators or fuel injection.

Frequently asked questions

How can I tell if the purge valve is faulty?

Typical signs are an illuminated check engine light with an EVAP-related fault code, rough idling or hard starting right after refuelling, and a fuel smell. However, the same symptoms can be caused by leaking hoses or a faulty fuel cap, so check those as well.

Does the number of hose ports on the valve matter?

Yes. The valves come with, for example, 1, 2 or 3 hose ports depending on the car. The number and position must match the original valve, otherwise the hoses cannot be fitted correctly.

Can I replace the valve myself?

Often yes, as the valve is typically easy to access with one electrical connector and a few hoses. Access does depend on the car, though. Work on a cold engine, and clear the fault codes afterwards with a diagnostic tool.

Does a faulty valve affect how the engine runs?

It can. A valve that is stuck open can disturb the air-fuel ratio, especially at idle, while a valve that does not open usually only causes a fault code and the check engine light. How noticeable it is depends on the car and type of fault.

View as Grid List
Sort by
Display per page

Solenoid

gatPV384
Gates 16-20 Mercedes-Benz GLC300 4-Cyl. 2.0L Vapor Canister Purge Solenoid
$534.61 excl. VAT

Solenoid

gatPV398
Gates 03-04 Toyota Corolla 4-Cyl. 1.8L Vapor Canister Purge Solenoid - 2 Hose Port
$691.35 excl. VAT

Solenoid

gatPV397
Gates 06-11 Chevrolet Impala V-6 3.5L Vapor Canister Purge Solenoid - 1 Hose Port
$322.84 excl. VAT

Solenoid

gatPV390
Gates 98-03 Chevrolet S Series Pickup 4-Cyl. 2.2L Vapor Canister Purge Solenoid
$447.17 excl. VAT

Solenoid

gatEMH910
Gates 01-05 BMW 325I 6-Cyl. 2.5L Vapor Canister Purge Solenoid
$1,921.26 excl. VAT

Solenoid

gatPV389
Gates 12-17 Volkswagen CC 4-Cyl. 2.0L Vapor Canister Purge Solenoid - 3 Hose Port
$943.89 excl. VAT