Shifter Accessories
Does your gear lever wobble in neutral, or are you no longer hitting the gears as precisely as before? This category brings together bushings for the gear lever, shifter cables and shift linkages, as well as a shifter boot. It is for you if you want to remove play from a worn setup or tighten up the shifting in a project.
What do bushings and boots do for your shifting?
Original rubber bushings in the gear lever, shifter cables and linkages can soften or crack over time. The gear lever then develops play, and shifts feel imprecise. Stiffer bushings can typically give a more direct feel, but they can also transmit more vibration into the cabin. How much depends on the product and the car. Here you will find, for example, bushings from Torque Solution for shifter cables, the front and rear of the gear lever and shift linkages, some of them in billet. At OMIX you will find, among other things, a shifter boot for Willys and Jeep models with the Dana 18. A boot keeps dirt and moisture away from the mechanism beneath the gear lever.
How to choose the right accessories
First, find out where the play is: at the base of the gear lever, in the cable mount at the gearbox or in the linkages. Then choose based on these criteria:
- Car model and year – the bushings are made for specific models, e.g. Honda Civic 2007-12, Subaru WRX 2015+ or Hyundai Genesis Coupe, and the model year can be decisive for fitment.
- Location – front, rear, cable and linkage bushings remove play at different points in the system.
- Project goal – bushings can be combined with a short shifter or new shift linkages if you also want a shorter throw on the gear lever.
During installation, the old bushings typically have to be pressed or cut out. Check the instructions for the specific part number before you start.
Frequently asked questions
Do stiffer shifter bushings cause more vibration in the cabin?
They can. A firmer material typically dampens less than soft rubber, so more vibration from the engine and gearbox can reach the gear lever. How noticeable it is depends on the bushing's location and on the car.
How can I tell if the play is caused by the bushings?
Rock the gear lever in neutral while someone else watches the bushings at the base of the lever and at the gearbox. If cable ends or linkages move in their mounts, or the rubber is cracked, the bushings are a likely place to start.
Should I replace all the shifter bushings at once?
It is not a requirement, but rubber parts in the same system often age at roughly the same rate. If you only replace one bushing, play from the others may still be felt. So assess the whole system while it is apart anyway.