0

Subwoofers

Is your music lacking punch in the low end, or do you want a system with bass you can feel? A subwoofer reproduces the lowest frequencies, which regular door speakers typically don't deliver with the same impact. You can choose from drivers from 6.5 to 15 inches for both car and boat.

How to choose a subwoofer

Size, power and space go hand in hand. A larger cone can move more air, but the result also depends on the enclosure, amplifier and installation – diameter alone does not determine bass reproduction. Look at the RMS power rather than the peak figure, as RMS indicates the power the driver is designed to handle over longer periods.

  • Impedance: 1, 2 or 4 ohms must match what your amplifier can run stably.
  • SVC or DVC: a dual voice coil gives more wiring options, making the driver easier to match to the amplifier.
  • Mounting depth: shallow mount models are lower and can fit where space is limited, e.g. under a seat.
  • Environment: water-resistant and marine models, e.g. DS18 NXL, are designed for damp conditions.

Enclosure, power and integration with the rest of the system

A subwoofer typically needs to be mounted in an enclosure whose volume and type match the driver's specifications – see our speaker enclosures. At high power, the power cable, fuse and the car's electrical system must be sized for the amplifier. For midrange and treble, combine with car speakers, and you'll find other parts for your project under audio components. The range from DS18 here spans from 6.5-inch ZR models to the 15-inch Hooligan with 4000 W RMS.

Frequently asked questions

What is the difference between SVC and DVC?

SVC has one voice coil, DVC has two. With two coils you can wire the driver in series or parallel and thereby reach a different total impedance, making it easier to match to your amplifier.

Should I go by RMS or peak power?

RMS is the figure you should match with the amplifier's output power. Peak indicates brief peaks and says less about what the driver can handle over time. The amplifier should deliver roughly the RMS power the subwoofer is rated for.

Why does my subwoofer sound distorted or bottom out?

It can be caused by too much gain, so the signal clips, an enclosure that doesn't suit the driver, or incorrect impedance. High excursion models allow greater cone movement but still require correct setup.

View as Grid List
Sort by
Display per page