0

Valve Spring Kits

Have you fitted a camshaft with more lift, or does your engine need to handle higher revs? A valve spring kit combines springs and retainers that are matched to each other and to a specific engine, so the valves close in a controlled way. The kits are for you if you are upgrading the valvetrain in your project.

What a valve spring kit does

A kit typically consists of valve springs and matching retainers, so you don't have to combine parts from valve springs and valve spring retainers yourself. The springs keep the valve in contact with the cam lobe. If spring pressure is too low for the lift and revs, the valve can float or bounce on the seat. The category includes, for example, kits from Brian Crower for Honda B18C and K20A or Nissan VQ35DE, and from COMP Cams for Dodge 5.7L Hemi. You will also find kits from Supertech, Ferrea and GSC Power Division.

How to choose a valve spring kit

  • Lift: The spring must handle the camshaft's maximum valve lift without coil bind. The kit's stated lift limit, e.g. 0.600 inches on a COMP Cams kit, must suit your camshaft.
  • Spring type: Single, dual or beehive spring. The choice depends on the required spring pressure, the space in the cylinder head and the camshaft manufacturer's recommendation.
  • Retainers: Titanium can reduce moving mass in the valvetrain, while steel typically withstands wear well.
  • Fitment: The kits are engine-specific, and some have special requirements, e.g. a Toyota 3SGTE kit that only fits shimless buckets.

Installation and checks

Measure the installed height so the spring pressure is as specified. It makes sense to replace the valve stem seals while the cylinder head is apart anyway. If you also replace the camshafts, you must check piston-to-valve clearance. Spring pressure can drop over time, so check the springs at the next teardown.

Frequently asked questions

Can I reuse my old retainers with new springs?

It depends on the spring diameter and seat shape. A valve spring kit comes with matching retainers, so you avoid incorrect fitment. Also check that the valve locks fit the retainers.

When do dual springs make sense over single springs?

Typically when the camshaft requires more spring pressure or higher lift than a single spring can handle. Follow the camshaft recommendation, as excessive pressure can increase wear on cam lobes and lifters.

What should I check after installation?

Check installed height, valve clearance and piston-to-valve clearance, especially if the camshaft has also been replaced. The engine management typically only needs adjusting if the rev limit or camshaft is changed.

View as Grid List
Sort by
Display per page

.6 Lft BH Kit Stl Rtnrs 03-08 5.7L HEMI

cca26918CA-KIT
COMP Cams 03-08 Dodge 5.7L Hemi 0.600in Lift Beehive Spring Kit w/ Steel Retainers
$4,668.03 excl. VAT