Water Pumps
Is coolant seeping at the pump, or does the cooling system in your project need a pump that can be controlled independently of engine speed? This category contains mechanical and electric water pumps as well as rebuild kits – for you who want to restore or improve coolant circulation and reduce the risk of overheating.
What the water pump does in the cooling system
The water pump circulates coolant between the engine, thermostat and radiator. A mechanical pump is typically belt-driven and follows engine speed, so flow can be low at idle. An electric pump can be controlled separately and, for example, keep running after the engine is switched off. In this category you will find, among others, pumps from Mishimoto, electric pumps from Bosch and a universal coolant pump from Aeromotive for remote mounting. Electrically driven solutions are collected under electric water pumps.
How to choose a water pump
The choice depends on more factors than flow alone:
- Fitment: check the part number, OE number and connections against your engine – the Bosch pumps, for example, are listed with OE numbers.
- Flow: more flow is not automatically better; it has to match the radiator, hoses and thermostat.
- Power and control: electric pumps are available with different power ratings, e.g. 50 W and 58 W, and require a suitable power supply and control.
- Connection: universal pumps can have threads such as 3/4 NPT, which require the right fittings.
Rebuild, installation and maintenance
Coolant at the weep hole, noise from the bearing or play in the shaft can indicate wear. If the pump is to be rebuilt rather than replaced, see water pump rebuild kits. Hot Rods offers complete water pump kits, including for the Honda TRX 420, and the brands in the category also include Gates and Edelbrock. When installing, you should check the belt and tensioner and bleed the system afterwards, as air pockets can cause local overheating. If the temperature needs to be controlled precisely, also see thermostats and thermostat housings.
Frequently asked questions
When does an electric water pump make sense?
An electric pump can be relevant if the flow needs to be controlled independently of engine speed, or if the pump needs to run after the engine is switched off. This typically requires a controller, an adequate power supply and correct wiring.
How can I tell that the water pump is worn?
Typical signs are coolant at the weep hole, squealing or growling noises, play in the shaft and rising temperature. However, rising temperature can also be caused by the thermostat, radiator or air in the system, so troubleshoot the entire cooling system.
Should the water pump be rebuilt or replaced?
It depends on the condition and design of the pump. If the housing and impeller are in good shape, a rebuild kit may be enough, depending on what the kit contains. If the housing is corroded or damaged, a new pump is typically the safest choice.
Does the cooling system need to be bled after installation?
Yes. Air pockets can cause poor circulation and local overheating. Follow the procedure for your engine, use the bleed screw where fitted, and check the coolant level again once the engine has cooled down.