Tie-Down & Tow Straps
What keeps your project car in place on the trailer, and what do you use when a car needs towing? In this category we bring together ratchet straps, tie-down straps, tow straps and shackles for you who transport a car, motorcycle or equipment to a trackday, or who need safe towing gear.
Ratchet straps, tie-downs and tow straps – what does what?
Tie-down straps are used to secure a load, e.g. a motorcycle on a trailer, while ratchet straps let you tighten the strap step by step and lock the tension. Tow straps are designed for pulling a vehicle and typically have to withstand far greater forces than tie-down gear. Shackles connect the strap to the tow eye or another anchor point. The range includes, for example, 1-inch straps from BikeMaster in several colours and D-ring isolator kits from Rugged Ridge, and Rhino USA, NRG, SpeedStrap and Matrix Concepts are also represented.
How to choose the right gear
Strength alone doesn't decide the choice – several factors come into play:
- Working load limit: Look for the stated working load limit, not just the breaking strength, and choose based on the weight of what you are securing or towing.
- Width and length: A wider strap typically distributes pressure better, while the required length depends on the distance between the anchor points.
- Fittings and ends: Hooks, loops and shackles must fit the eyes on the trailer or car and have at least the same load capacity as the strap.
- Number and direction: Loads are typically secured with several straps in different directions so they cannot slide forward, backward or sideways.
Use and maintenance
Inspect the straps before every use for frayed edges, cuts and worn stitching, and discard them if they are damaged. Sharp edges can cut into the webbing, so protect it where it rests against metal. Let wet straps dry before packing them away, and store them in the dark, as sunlight can weaken the material over time. Rules for load securing and towing depend on the vehicle and situation, so check them for your specific use.
Frequently asked questions
What is the difference between a tie-down strap and a tow strap?
A tie-down strap holds a load in place during transport, while a tow strap is designed to pull a vehicle. Never use tie-down gear for towing, as it is typically not rated for the forces involved.
Do shackles and hooks need the same strength as the strap?
Yes, the connection is never stronger than its weakest link. Check the stated working load limit for the shackle, hook and anchor point so that they at least match the strap and the task you are using it for.
When should a strap be replaced?
Replace it if the webbing is frayed, cut or melted, if the stitching is worn, or if the ratchet and hooks are bent or rusty. The label with load data should also be legible.