0

Alignment Tools

What tools do you need to set camber, caster and toe precisely after lowering your car or fitting new suspension? Here we have gathered special wheel alignment tools for you who want to adjust your car's wheel angles yourself in the garage.

What the tools are used for

The tools in this category make it easier to adjust the wheel angles during a project with new or modified suspension. From SPC Performance you will find, for example, a universal camber/caster tool, a tie rod tool and tools for adjusting rear toe on BMW and MINI. Slot punches in 12 x 8 mm and 14 x 16 mm can be used to elongate existing holes, which typically gives extra adjustment range. How much you gain depends on the car's design and the parts you fit.

How to choose the right tool

Start with what you want to adjust and how the car is built:

  • Adjustment type: camber and caster, toe, or extra adjustment range via slotted holes.
  • Fitment: a universal tool or a tool made for a specific car make, such as BMW or MINI.
  • Hole size: the punch dimensions must match the bolt and the bracket to be worked on.
  • Adjustable parts: the tool does not replace eccentric bolts or adjustable top mounts – without them there is often not much to adjust.

After the adjustment

Tighten bolts and nuts to the car manufacturer's torque and check the alignment with a precise measurement before the car is used on the road or at a track day. Changed angles can affect tyre wear and handling. Whether a suspension modification requires an inspection or approval depends on the car and the modification. See also the other parts for suspension tuning and the full range from SPC Performance.

Frequently asked questions

What can a slot punch be used for in wheel alignment?

It can turn round holes into slots, for example in a bracket, so the bolt gets more adjustment range. This permanently alters the part, so check the car manufacturer's instructions, and whether the modification matters at inspection, before you punch.

Should I choose a universal or a car-specific tool?

A universal camber/caster tool can be used on several cars, while a tool for rear toe on, for example, BMW or MINI is made for a specific design. Check the product description for the specific part number.

Should the alignment be measured after I have adjusted it myself?

Yes, that is recommended. The tool makes the adjustment easier, but only a precise measurement shows whether camber, caster and toe are actually correct, and whether the angles are the same on both sides.

View as Grid List
Sort by
Display per page

SPC 74920 14 x 16mm SLOT PUNCH

spc74920
SPC Performance 14x16mm Slot Punch Tool
$2,246.51 excl. VAT

SPC 74940 12 X 8mm SLOT PUNCH

spc74940
SPC Performance 12x8mm Slot Punch Tool
$2,009.77 excl. VAT