0

Thermostat Gaskets

Is coolant dripping from the thermostat housing, or does the thermostat need replacing as part of a project? This category brings together gaskets and seals that seal the joint between the thermostat housing and the engine, for you who service the cooling system yourself or in the workshop.

What does a thermostat gasket do?

The thermostat typically sits in a housing bolted to the engine, and the gasket must keep the joint sealed against pressurised coolant and changing temperatures. A leaking joint can cause coolant loss and air in the system, and in the worst case it can lead to overheating. Depending on the engine, the seal can be a flat gasket or a sealing ring that sits at the edge of the thermostat. The category belongs to engine gaskets and seals, and if you are taking parts of the engine apart anyway, it may also be worth looking at intake manifold gaskets or a complete engine gasket set.

How to choose the right thermostat gasket

Fitment is everything, so always check the part number against your car and engine. Many product names state the model and year, e.g. Gates for Toyota Corolla 1.8L and Fel-Pro for Honda S2000. Also look out for:

  • Shape and type: flat gasket or sealing ring, depending on the design of the housing.
  • The thermostat: some thermostats come with a seal, others require a separate one.
  • Mating surfaces: clean them of old gasket material and corrosion, and tighten the bolts evenly to the car's specification.
  • After fitting: bleed the cooling system and check for leaks when the engine is warm.

In this category you will find brands such as Gates, Fel-Pro, Cometic Gasket and OMIX.

Frequently asked questions

Should the gasket be replaced when the thermostat is replaced?

It is typically recommended, because a used gasket may have settled and lost its ability to seal. Some thermostats come with a new seal, so check the contents before ordering a separate one.

How do I know if the thermostat gasket is leaking?

Typical signs are coolant residue or crusts around the thermostat housing, a falling level in the expansion tank and a sweet smell from the engine bay. Also check the hoses and the housing itself, as the leak can have several causes.

Should I use sealant on a thermostat gasket?

It depends on the gasket and the manufacturer's instructions. Some gaskets must be fitted dry, while others may require a thin layer. Too much sealant can be pushed into the cooling system and cause problems.

View as Grid List
Sort by
Display per page

Gasket

gat33644
Gates 82-88 Camaro / 69-71 Mustang / 90-05 Mazda MX-5 Miata Thermostat Gasket
$50.41 excl. VAT

Gasket

gat33638
Gates 99-04 Jeep Grand Cherokee Thermostat Gasket
$47.60 excl. VAT

Seal

gat33615
Gates Thermostat Seal
$66.62 excl. VAT

Seal

gat33661
Gates 98-13 Toyota Corolla 1.8L Thermostat Seal
$65.48 excl. VAT

Colnt Thmst Hsng Sel

fel35162
Fel-Pro 04-09 Honda S2000/08-17 Accord/09-14 Acura TL Engine Coolant Thermostat Housing Seal
$75.86 excl. VAT

Colnt Thmstat Seal

fel35445
Fel-Pro 16-17 Lexus IS300/07-15 GS350/93-98 Toyota Supra/95-23 Tacoma Engine Coolant Thermostat Seal
$74.32 excl. VAT