0

Tire Valves

Is your tire losing air at the valve, or has the rubber become hard and cracked? The tire valve is a small part, but it has to seal tightly so the tire keeps its pressure. This category contains rubber, aluminium and chrome valves from BikeMaster for replacement when changing tires or as a coloured detail.

Rubber valve or metal valve?

Rubber valves, e.g. BikeMaster Valve Stem TR412 and the short rubber valve, are typically pressed into the rim's valve hole and seal with the rubber itself. Over time the rubber can become hard and crack, which is why the valve is often replaced together with the tire. Aluminium or chrome valves are typically secured with a nut and gasket. They are available in colours such as black, blue, gold and chrome, so they can match other wheel accessories.

How to choose the right valve

  • Valve hole diameter: measure the hole in the rim. This category includes, for example, valves marked 11.3 mm and 15 mm.
  • Rim type: a tubeless valve seals directly against the rim, so the rim must be designed for tubeless tires.
  • Length: you need to be able to reach it with the air pump without the valve hitting other parts of the wheel.
  • Pack size: sets of two suit a single project, while the pack of 100 valves without valve cores is for you if you fit many valves and have your own cores.

Fitting and maintenance

The valve is replaced while the tire is removed, which is a good opportunity to also inspect the rims and spoke sets. Tighten the nut on metal valves carefully, as overtightening can damage the gasket. Always fit the valve cap so dirt and moisture are kept away from the core. You can find more parts in tire and wheel accessories and the full range from BikeMaster.

Frequently asked questions

When should I replace the tire valve?

Rubber valves are typically replaced when changing tires, or if the rubber is hard or cracked or the valve is losing air. Metal valves can often be reused, but it depends on their condition, and the gasket should always be checked.

How do I find out what diameter the valve needs?

Measure the valve hole in the rim or check the rim's specifications. Then choose a valve for the measured diameter, e.g. 11.3 mm or 15 mm, and check that it suits your rim type.

How do I find a leaking valve?

Brush soapy water onto the valve and around its base at the rim once the tire is inflated. If bubbles form, the valve or the core is leaking. A loose valve core can often be tightened with a valve tool.

View as Grid List
Sort by
Display per page