Starter Solenoids
Does it just click when you press the start button, without the starter motor turning? Then the starter solenoid may be the culprit. In this category you will find starter solenoids from QuadBoss for a range of ATV and UTV models, as well as a universal version for those who do their own maintenance or repairs.
What does a starter solenoid do?
The starter solenoid is the switch between the battery and the starter motor. When you turn the key or press the start button, a small control current signals the solenoid, which then closes the high-current circuit to the starter motor. Worn contacts, corrosion or a faulty coil can cause a click without starting, a starter motor that keeps running, or no response at all. However, the same symptoms can also be caused by a weak battery, a poor ground connection or the starter motor itself, so it is a good idea to measure before you replace anything.
How to choose a starter solenoid
The most important criterion is fitment to your machine. The solenoids from QuadBoss are listed for specific models, e.g. Honda TRX, Yamaha YFM, Suzuki LT-F and Polaris Sportsman and Ranger. Check in particular:
- model and year in the product description
- number and type of terminals as well as the ground connection
- mounting and brackets compared to the original location
The universal model can be a solution if no model-specific version is available, but it depends on the voltage, terminals and mounting matching your installation.
Installation and maintenance
Disconnect the battery before loosening the cables, and note which wire goes where. Clean the cable lugs and terminals, and tighten the connections properly – loose or corroded connections can cause voltage drop and heat build-up. If you need other parts for the starting system, you will find them under starters.
Frequently asked questions
How do I know if the starter solenoid is faulty?
A click without the starter motor turning can point to the solenoid, but check the battery voltage and ground connection first. With a multimeter you can measure whether control current reaches the solenoid and whether current passes through when you activate the starter.
Can I use the universal starter solenoid instead of a model-specific one?
It depends on your machine. Voltage, terminals and mounting must match the existing installation. A model-specific solenoid is typically easier to install because it is designed for the original location and wiring.
Why does the starter motor keep running after I release the button?
This can be caused by the contacts in the starter solenoid having welded together, so the current is not interrupted. Disconnect the battery quickly to avoid damage to the starter motor, and check the solenoid and start button before using the machine again.