Transfer Case Gaskets & Seals
Is oil leaking from the joint between the transmission and the transfer case, or is the cover weeping after a teardown? In this category we've gathered gaskets, gasket kits and seals for the transfer case – for you who are repairing, rebuilding or assembling a project.
What the gaskets do
Gaskets and seals keep the oil in and water and dirt out where the transfer case housings, covers and the adapter to the transmission meet. A leaking joint can lead to a low oil level and increased wear on bearings and gears. You'll find, for example, adapter gaskets and gasket kits from Fel-Pro as well as gaskets and a vacuum switch seal from OMIX.
How to choose a gasket
Fitment depends on the transfer case type and the vehicle's model year, not just the make. So check the part number against your vehicle, e.g. Jeep, Willys, Chevrolet or Ford.
- Single gaskets for one joint, e.g. the adapter to the transmission.
- Gasket kits when the case is fully disassembled – see transfer case gasket kits.
Installation and adjacent seals
Clean the old gasket off the mating surfaces without scratching the metal, tighten the bolts evenly according to the instructions, and fill with the specified oil. Leaks at the transmission or the axles often require parts from transmission gaskets or oil seals.
Frequently asked questions
Should I choose a single gasket or a gasket kit?
If you're only replacing one leaking joint, e.g. at the adapter, a single gasket can be enough. If the transfer case is fully disassembled during a rebuild, a gasket kit typically covers several joints at once, but the contents depend on the specific kit.
How do I know if the gasket fits my transfer case?
Compare the product description with the vehicle's model, model year and transfer case type, e.g. Dana 18 on older Willys. If the type isn't clearly stated, check the case's ID tag or the old part number before you order.
Can I reuse the old gasket?
It's typically not recommended. A used gasket is compressed and may have hardened, so it seals less well when reinstalled. Clean the surfaces and fit a new gasket while the case is open anyway.