0

Clutch Hydraulics

Does your clutch pedal feel soft, or does the hydraulic system need to keep up with a stronger clutch in your project? This category contains master cylinders, upgrade kits, adapters and clutch lines that transfer the movement from the pedal to the clutch.

What the clutch hydraulics do

The master cylinder converts the force from the pedal into hydraulic pressure, which is carried through the clutch line to the clutch slave cylinder. The slave cylinder then pushes the release bearing against the pressure plate so the clutch disengages. How heavy and precise the pedal feels depends on, among other things, the cylinder bore, the design of the line and whether the system is free of air.

How to choose a master cylinder and line

The bore affects the ratio between pedal effort and pedal travel: a larger bore typically gives shorter travel and a heavier pedal, while a smaller bore typically does the opposite. The right choice depends on the slave cylinder and the clutch you run, and if you have fitted a stronger clutch kit, the demands on the hydraulics may change. Look for:

  • fitment for your exact model and year, e.g. kits for Honda Civic, Dodge Neon SRT4 or Honda S2000
  • bore in relation to the rest of the system, e.g. the .75in kits from Clutch Masters for Civic
  • length and fittings of the clutch line, e.g. McLeod lines for Mustang
  • adapters if you combine parts, e.g. the BLOX Racing adapter for an S2000 master cylinder in Civic and Integra

Exedy and Chase Bays are also among the brands in this category.

Installation and maintenance

After installation, the system must be bled thoroughly, as air can cause a soft pedal or a clutch that does not fully disengage. Use the fluid type specified by the vehicle manufacturer and change the fluid regularly, as it absorbs moisture over time. See also the rest of the range under clutches and flywheels.

Frequently asked questions

When does a master cylinder with a larger bore make sense?

Typically when pedal travel is long or the clutch does not fully disengage, e.g. after switching to a stronger clutch. On the other hand, a larger bore can make the pedal heavier, so the choice depends on the slave cylinder and clutch.

Should the slave cylinder be replaced at the same time as the master cylinder?

It is not always necessary, but the two cylinders work together and their bores affect each other. If the slave cylinder is old or leaking, it can be practical to replace both and bleed the system once.

Why does the pedal feel soft after installation?

The most common cause is air in the system, which requires more thorough bleeding. A soft pedal can also be caused by leaks at the joints or an incorrect combination of bores between the master and slave cylinder.

View as Grid List
Sort by
Display per page

Clutch Hydraulic Hose

mlr139251
McLeod Line Assy Mustang 2005-Up 36in With Male Wire Clip Fittings
$755.69 excl. VAT