Exhaust Rubber Mounts
Is your exhaust rattling against the underbody, or hanging crooked after a new project? Rubber mounts hold the exhaust system to the body while damping vibrations, so pipes and joints are not put under unnecessary stress. This category is for you if you need to replace worn mounts or fit new ones.
What does a rubber mount do?
The exhaust moves with the engine, and the rubber mount absorbs these movements so they are not transferred directly into the body or cause cracks at the joints. The mount typically sits between a hook on the pipe and a bracket on the underbody. You will find the hooks themselves under exhaust hangers and in the parent category hangers and brackets.
How to choose rubber mounts
- Fitment: Some mounts are made for a specific car, e.g. Land Rover Range Rover (P38A) 1995-2002, while others are universal.
- Dimensions: Hole spacing and pin diameter must match the hooks.
- Hardness: A stiff mount can reduce movement, but can also send more vibration into the cabin.
- Heat: Rubber close to hot pipes can age faster.
Brands in this category include Magnaflow.
Frequently asked questions
When should rubber mounts be replaced?
Replace them if the rubber is cracked, hard, stretched or has come off the pin. If the exhaust knocks against the underbody at start-up, worn mounts are a typical cause, but also check the hangers and joints.
Can I use a universal mount instead of a car-specific one?
Often yes, if the pin diameter, hole spacing and length match the hooks on your car. The wrong mount can position the exhaust crooked, so measure the existing mounts first.
Should I replace all mounts at once?
It is not a requirement, but mounts of the same age are often equally worn. If you only replace one, the old ones can still let the exhaust move too much.