Body Panels
Is the floor pan rusted through, or does the entire body tub on your classic Jeep need replacing? This category contains panels from Omix for restoring e.g. the Jeep CJ5, CJ7 and Willys M38 – from individual floor and side panels to complete body tubs.
From floor pan to complete body tub
The category covers both individual repair panels and complete bodies. A front or rear floor panel, a side panel or a cowl side panel can typically be welded in where the rust is localised. If the body is corroded in many places, a complete body tub from Omix can be an alternative, e.g. with Jeep lettering for the CJ5 or as a steel reproduction for the CJ5 model years 70-71. The choice depends on how much original material can be saved and on the goal of your project.
How to choose the right panel
The parts are divided by model and year range – for the CJ5 e.g. 55-69, 70-71, 72-75 and 78-83 – so check both for your vehicle before you order.
- Model: a distinction is made between, among others, the CJ5, CJ7, CJ8 and Willys M38.
- Side: side panels are available as right or left, and some versions have a logo.
- Extent: assess whether a partial panel covers the damage or whether larger sections need replacing.
- Adjacent parts: plan fenders, hood and doors at the same time if they are part of the project.
Installation and rust protection
Installation typically requires fitting, welding and finishing, and a new panel should be test-fitted before it is welded in place. For fastening, you will find body panel mounting parts. Clean and rust-proof the panel on both sides before painting, and be especially thorough with the floor pans, where water and dirt typically collect.
Frequently asked questions
Should I choose a partial panel or a complete body tub?
It depends on the extent of the rust. If the damage is limited to e.g. the floor or side, a partial panel may be enough. If the body is weakened in many places, a complete tub can save fitting and welding of many individual parts.
Does the vehicle need to be inspected if I replace the entire body?
It depends on the vehicle and the product. Contact a vehicle inspection centre before you replace a complete body tub so you know the requirements for registration and identification, and check the information for the specific part number.
How do I prevent a new floor panel from rusting?
Remove all rust and old seam sealer around the weld-in area, protect weld seams and back sides, and keep drain holes open. How long the panel lasts typically depends on the preparation and on how the vehicle is used and stored.