Fan Blades
Is your fan blade cracked, bent or missing a piece of a blade? An intact fan is important for airflow through the radiator at low speed. This category contains replacement fan blades for mechanical cooling fans, e.g. from OMIX for the Jeep Wrangler YJ with the 4.0L engine.
What the fan blade does
The fan blade pulls air through the radiator, especially at idle and at low speed when the airflow from driving is not enough. On many engines it is mounted on the water pump, typically via a viscous fan clutch. A cracked or bent fan blade can cause imbalance, vibrations and poorer cooling. With a tight-fitting fan shroud, the airflow is typically used more effectively.
How to choose a fan blade
Fitment depends on the specific part number, so check:
- Engine and model year – e.g. the OMIX fan blade is designed for the Jeep Wrangler YJ 4.0L from 91-95
- Diameter and number of blades, so the fan matches the shroud and radiator
- Bolt pattern and clearance to the clutch, water pump and radiator
- Direction of rotation, where relevant for the belt drive
Check the fan blade for cracks when you are replacing the belt anyway. If your project uses an electric fan, it is controlled with fan controllers instead, and the rest of the range is found under cooling fans.
Frequently asked questions
Can I straighten a bent fan blade?
It is not recommended. A straightened blade can have micro-cracks and create imbalance, which puts strain on the water pump bearing and in the worst case can cause the blade to break during operation. A bent or cracked fan blade should be replaced.
Should the viscous clutch be replaced at the same time as the fan blade?
Not necessarily, but it is a good time to check it. Play in the bearing, oil around the clutch or a fan that constantly freewheels or is constantly fully engaged can indicate wear.
Why does the temperature rise at idle, even with a new fan blade?
Cooling at idle depends on the whole system. If the fan shroud is missing, the clutch is worn or the radiator is clogged, the airflow can be insufficient. Also check the coolant level and thermostat before you replace more parts.