0

Chassis Components

Does the body twist noticeably in hard corners, or is the frame corroded after many years of use? In this category we bring together parts that stiffen, reinforce or repair your car's chassis – from strut braces and reinforcement plates to subframes and repair parts. For you with a project for track or road, or a tired frame.

What do chassis components do?

A chassis that flexes under load can cause imprecise steering and suspension that doesn't work as set up. Chassis braces such as strut braces and pillar braces connect points in the body so it typically moves less. Subframe braces and connectors between the front and rear frame do the same further down, while reinforcement plates strengthen exposed brackets and weld seams. If the frame is rusty or damaged, you'll find chassis frame repair parts.

How to choose chassis components

How much stiffening makes sense depends on how the car is used, its tyres and suspension – a very stiff chassis on soft suspension doesn't necessarily give better handling. Look especially at:

  • Fitment: the parts are made for specific models and model years, so check the part number against your car.
  • Installation: bolt-on parts can typically be fitted without welding, while others require welding and precise measuring.
  • Clearance: a strut brace or other brace can interfere with the intake, exhaust or other parts.
  • Material and finish: material choice and surface treatment affect weight and resistance to rust.

In this category you'll find, for example, Cusco, BMR Suspension, UMI Performance, Artec Industries and RustBuster. Examples include strut braces and bolt-on subframe connectors from BMR Suspension as well as Power Brace and pillar braces from Cusco.

Installation, inspection and maintenance

If a subframe is replaced or reinforced, it's a good idea to look at bushings and mounts at the same time – worn bushings and mounts can otherwise eat up part of the gain. After work on the subframe or suspension, the wheel alignment should be checked. Welding in load-bearing parts and modifications to the frame can affect roadworthiness inspection, and whether a part is permitted depends on the product and the car – check this for the specific part number. Re-torque bolts after the first few drives, and keep an eye on rust at new welds and brackets.

Frequently asked questions

What is the difference between a strut brace and a reinforcement plate?

A strut brace connects two points, typically the strut towers, so they move less relative to each other. A reinforcement plate strengthens a specific spot, e.g. a bracket or a weld seam that can crack under load.

Do chassis components need to be welded on?

It depends on the part. Some braces and connectors bolt on, while reinforcement plates and repair parts are typically welded. Welding in load-bearing parts should be done by a professional, and rust protection afterwards is important.

Can my car pass inspection with new chassis components?

It depends on the product, the car and how the part is fitted. Welding and modifications to load-bearing parts in particular can matter at inspection. Check the requirements and any documentation for the specific part number before installation.

View as Grid List
Sort by
Display per page

BMR Suspension - CB008H

bmrCB008H
BMR 16-17 6th Gen Camaro Front Of Rear Cradle Brace - Black Hammertone
$1,573.17 excl. VAT

BMR Suspension - CB008R

bmrCB008R
BMR 16-17 6th Gen Camaro Front Of Rear Cradle Brace - Red
$1,574.51 excl. VAT

BMR Suspension - CB009R

bmrCB009R
BMR 16-17 6th Gen Camaro Rear Of Rear Cradle Brace - Red
$2,380.75 excl. VAT

BMR Suspension - CB762H

bmrCB762H
BMR 15-18 Ford Mustang S550 IRS Subframe Support Brace (Black Hammertone)
$2,649.96 excl. VAT

BMR Suspension - CB762R

bmrCB762R
BMR Suspension 15-18 Ford Mustang S550 IRS Subframe Support Brace (Red)
$2,660.81 excl. VAT

BMR Suspension - CJR002H

bmrCJR002H
BMR 15-17 S550 Mustang Super Low Profile Chassis Jacking Rails - Black Hammertone
$2,146.08 excl. VAT

BMR Suspension - CJR002R

bmrCJR002R
BMR 15-17 S550 Mustang Super Low Profile Chassis Jacking Rails - Red
$2,136.98 excl. VAT

BMR Suspension - CJR760H

bmrCJR760H
BMR 15-20 S550 Mustang Chassis Jacking Rails (Shorter Tube) - Black Hammertone
$1,804.76 excl. VAT

BMR Suspension - DTB004H

bmrDTB004H
BMR 10-15 5th Gen Camaro Driveshaft Tunnel Brace - Black Hammertone
$809.52 excl. VAT

BMR Suspension - DTB004R

bmrDTB004R
BMR 10-15 5th Gen Camaro Driveshaft Tunnel Brace - Red
$807.84 excl. VAT

BMR Suspension - DTB006R

bmrDTB006R
BMR 16-17 6th Gen Camaro Aluminum Driveshaft Tunnel Brace - Red
$1,040.03 excl. VAT

BMR Suspension - STB019H

bmrSTB019H
BMR 16-17 6th Gen Camaro Front Twin Tube Design Strut Tower Brace - Black Hammertone
$2,504.41 excl. VAT