0

Driveshaft Yokes

Does your driveshaft vibrate after the car has been lifted, or does the yoke need to fit a new axle or differential? In this category you will find driveshaft yokes, pinion gears and shim kits for adjusting the pinion angle. The parts are for you who want your driveline to work without play and vibrations.

What a driveshaft yoke does

The driveshaft yoke connects the driveshaft to the transmission, transfer case or differential and passes the torque on via a U-joint. The yoke typically sits on a splined shaft, and the number of splines must match exactly. One example is the Ford Racing Driveshaft Yoke 31 Spline with 31 splines. The U-joint can be secured in different ways. OMIX U-bolt yokes, for example, hold it with U-bolts.

How to choose the right yoke

Start with the part the yoke will be mounted on, and check these points:

  • Axle or differential: For example, we have yokes from OMIX for the AMC20 in the Jeep CJ and for the Dana 44 in the Jeep Wrangler, as well as U-bolt yokes for Willys and Jeep models.
  • Splines: Spline count and spline diameter must match the shaft.
  • U-joint and attachment: U-joint size and attachment type must suit both the U-joint and the driveshaft.
  • Pinion angle: When ride height changes, the angle can change. Shim kits from Cognito in 3 and 4 degrees for Chevy/GMC Silverado/Sierra 1500/2500/3500 can be used to adjust it.

The category also includes pinion gears from S&S Cycle for various model years, including an undersized version with 31 teeth.

Installation and maintenance

Tighten the yoke to the torque specified by the manufacturer. On yokes mounted on the pinion shaft, the nut can affect bearing preload, so follow the instructions for the specific part. Check the oil seal at the same time, because a worn sealing surface on the yoke can cause oil leaks. Vibrations after installation can be caused by an incorrect angle, imbalance or worn U-joints. The exact cause depends on the car.

Frequently asked questions

How do I know if the yoke fits my axle?

Compare spline count, spline diameter, U-joint size and attachment type with the axle or differential the yoke will be mounted on. If the axle type is in the product name, e.g. Dana 44 or AMC20, that is a good starting point, but always check the dimensions.

When should the pinion angle be adjusted?

Typically after a change in ride height, because the angle between driveshaft and differential can change. An incorrect angle can cause vibrations and increased wear on the U-joints. How many degrees need adjusting depends on the car and the modification.

What are the signs of a worn driveshaft yoke?

Play in the splines, a clunk when shifting between forward and reverse, vibrations or oil leaking at the seal can indicate wear. However, the symptoms can also be caused by U-joints or bearings, so inspect the entire driveline.

View as Grid List
Sort by
Display per page

DrvShaftSlipYoke - M-4841-A

frpM-4841-A
Ford Racing Driveshaft Yoke 31 Spline
$1,083.95 excl. VAT

210-90467

cog210-90467
Cognito 99-19 Chevy/GMC Silverado/Sierra 1500/2500/3500 2WD/4WD 3 Degree Rear Pinion Angle Shim Kit
$794.86 excl. VAT

210-90468

cog210-90468
Cognito 99-19 Chevy/GMC Silverado/Sierra 1500/2500/3500 2WD/4WD 4 Degree Rear Pinion Angle Shim Kit
$830.00 excl. VAT