0

Crank Dampers

If your project raises engine speed or power, torsional vibrations in the crankshaft can put more stress on the engine. A crank damper sits at the front of the crankshaft, dampens these vibrations and typically also drives the belts. This category is for you if you want to replace the factory damper with one that matches your engine and belt drive.

What does a crank damper do?

Every ignition event gives the crankshaft a small twist, and at certain engine speeds the vibrations can amplify each other. The damper absorbs part of that energy so the load on the crankshaft and bearings can be kept down. How much this matters depends on the engine, rpm range and power level. Bolts and other mounting hardware can be found under harmonic balancer hardware, and the whole range is collected under harmonic balancers.

How to choose a crank damper

The category contains dampers from ATI and Fluidampr. With ATI, the key data is shown in the product name, so compare in particular:

  • Engine and model year: the damper must fit the specific engine, e.g. LS, Hemi or Honda K20, and account for differences such as VVT.
  • Diameter and material: aluminium or lightweight steel affects weight and clearance, but neither alone determines how the damper performs.
  • Belt grooves: the number must match your belt drive.
  • Drive ratio: some dampers have a larger or smaller pulley than stock, e.g. 6 percent overdrive or 15 percent underdrive, so the accessories spin faster or slower.
  • Supercharger: there are versions for supercharged engines, e.g. for Chevy big block.

Installation and inspection

The damper is typically pressed onto the crankshaft and secured with a centre bolt and key. Follow the manufacturer's instructions and torque specification, as incorrect installation can cause damage. When inspecting, check for cracks, play and – on dampers with a rubber ring – whether the outer ring has shifted so the timing marks no longer line up.

Frequently asked questions

What does the percentage in some dampers' product names mean?

It typically indicates how much the pulley diameter differs from stock. Above stock makes the accessories spin faster, below stock slower. Check that the alternator, water pump and power steering pump still work correctly in your rpm range.

When should the crank damper be replaced?

Typical signs are cracks, play, a bulging or displaced rubber ring, or an outer ring that has moved relative to the hub. With a significant increase in power or rpm, a new damper may also be relevant, depending on the engine.

Does one damper fit all engines in the same engine family?

Not necessarily. Model year, VVT, the crankshaft key and the belt drive layout can vary within the same family, e.g. LS or Hemi. Always compare engine, model year and number of belt grooves with the product data before ordering.

View as Grid List
Sort by
Display per page