Oil Pickups
Does your oil pressure drop in hard corners, or does a new oil pump need the right pickup tube? The pickup sits down in the oil pan and feeds oil to the pump. We have pickups and baffles for street and track builds as well as engine swap projects.
What does an oil pump pickup do?
The pickup is the tube with a screen that draws oil from the bottom of the oil pan up to the oil pump. If the opening is positioned incorrectly, or it sucks air through a leaking gasket, oil pressure can drop. This is typically most noticeable under hard acceleration, braking and cornering, when the oil sloshes away from the screen. A baffle or windage tray, e.g. the Torque Solution Oil Baffle Windage Tray for Subaru EJ engines, can help keep the oil collected around the pickup.
How to choose a pickup
- Pump: Many pickups are made for a specific pump. Moroso, for example, lists the matching part number in the product name.
- Oil pan: The pickup must match the pan depth and sump location, e.g. a 9.25-inch deep pan for SBC or a rear sump on an LS engine in a Chevy S10/Blazer.
- Tube diameter: E.g. 3/4 inch. It must match the pump inlet and the oil volume the pump is designed for.
- Mounting: Press-in or bolt-on flange depends on the pump design.
Installation and inspection
Measure the distance from the screen to the bottom of the oil pan before final installation. The recommended clearance depends on the product, so follow the manufacturer's instructions. Check gaskets and O-rings for leaks, and look for metal debris in the screen while the pan is off anyway. For hard track use, a dry sump system can be an alternative, as the entire oiling system has to work together. In this category you will also find brands such as Ford Racing, Peterson Fluid Systems and BLOX Racing.
Frequently asked questions
Can I reuse the original pickup with a new oil pump?
It depends on the pump. If the new pump has a different inlet, a different height or a larger capacity, the original pickup may fit poorly. Check the manufacturer's instructions for the specific pump and the specific part number.
Why is the clearance between pickup and oil pan important?
If the screen sits too close to the bottom, oil supply can be restricted. If it sits too high, it can suck air when the oil level drops in corners. The correct clearance depends on the pickup and pan, so always measure.
Does a press-in pickup need extra securing?
Some people secure press-in pickups with a bracket so the tube does not vibrate loose at high RPM. Whether this is necessary depends on the product and pump, so follow the manufacturer's recommendation for the specific part number.