0

Accessory Pulleys

Does your belt squeal on a cold start, or does an idler pulley rattle at idle? In this subcategory you'll find pulleys for the belt drive – idler pulleys, timing belt pulleys and lightweight alternator pulleys – for when you need to replace worn parts or upgrade the belt drive in your project.

What the pulleys in the belt drive do

The pulleys guide the serpentine (multi-rib) belt between the crankshaft and accessories such as the alternator. Idler pulleys – pulleys without their own accessory – guide the belt's path and keep it seated in the grooves. A worn bearing in an idler pulley can typically cause squealing or rattling noises and eventually make the belt wear unevenly. The range includes, for example, idler pulleys from Gates, including a grooved steel pulley with flanges and 7 ribs, as well as lightweight alternator pulleys from Perrin Performance for several Subaru models. See also the rest of our belts and pulleys.

How to choose the right pulley

Fitment is what matters most, so always check the part number against your car and engine. In particular, consider:

  • Groove profile and number of ribs – they must match the belt, otherwise it can slip or wear quickly.
  • Diameter – changes the accessory's speed relative to the engine and can therefore affect, for example, the alternator's charging output at low rpm.
  • Material and weight – a lightweight pulley reduces rotating mass, but how noticeable it is depends on the car and the project.
  • Smooth or grooved – depends on whether the pulley runs on the back or the ribbed side of the belt.

If you replace pulleys, check the belt and the belt tensioner at the same time, as wear often affects several parts of the belt drive. Timing belt pulleys belong to the engine's timing system and are typically replaced together with a timing belt kit.

Frequently asked questions

How can I tell if an idler pulley is worn?

Typical signs are squealing, rattling or humming noises from the belt drive, play when you rock the pulley with the belt removed, or the belt wearing on its edge. The noise can also come from the belt or the tensioner, so check all parts.

What does a lightweight alternator pulley do for the car?

A lightweight pulley reduces the rotating mass in the belt drive, which can give slightly quicker engine response. How noticeable it is depends on the car and the project. Also check whether the diameter differs from the original, as this can affect the alternator's charging output.

Should the belt be replaced at the same time as the pulley?

It's not always necessary, but often a good idea. If the belt is cracked, glazed or unevenly worn, it should be replaced so the new pulley doesn't run with a worn belt. The tensioner should also be checked while the belt is off.

View as Grid List
Sort by
Display per page

Belt Drive Pulley

gat36100
Gates 00-12 Ford Mustang / 00-09 Honda S2000 DriveAlign Idler Pulley
$244.04 excl. VAT

Belt Drive Pulley

gat36222
Gates 05-19 Nissan Frontier Steel V-Ribbed 7-Grooved Flanged Idler Pulley
$481.05 excl. VAT