Chain & Sprocket Kits
Is your chain stretched, and have the sprockets developed pointed or bent teeth? Then the chain and sprockets should typically be replaced together. Here we have gathered complete chain kits for motorcycles, dirt bikes and ATVs, where the parts are matched to fit each other.
Why you replace chain and sprockets together
The chain and sprockets wear together. If you fit a new chain on worn sprockets, the new chain can wear faster, and the same applies the other way round. A kit gives you parts with the same chain pitch and width. If you only need one part, you will find individual sprockets and drive chains, and the rest of the drivetrain is found under driveshafts, chains and couplers.
How to choose a chain kit
- OEM kit or conversion: An OEM kit typically follows the original layout, while e.g. the RK Chain Q/A 520 Conversion and the Renthal 428 Conversion Kit switch to a different chain size.
- Material: Aluminium sprockets are typically lighter, while steel typically withstands more wear. What suits you depends on your project and how you ride.
- Gearing: The number of teeth affects acceleration and engine speed at a given road speed.
- Model and exceptions: Check the part number against your model, e.g. Yamaha YZF-R6 or Suzuki GSX-R600, and read exceptions such as “Excluding HP-4” for the BMW S1000RR.
Fitting and maintenance
Chain tension and rear wheel alignment must follow the manufacturer's instructions, and the master link must be fitted correctly. Clean and lubricate the chain regularly, especially after riding in wet weather or mud. The category also includes kits for other purposes, e.g. Hot Rods kits with a roller chain for the oil pump and TwinPower kits with offset sprockets. S&S Cycle is also among the brands here.
Frequently asked questions
Can I just replace the chain and keep the sprockets?
It is possible, but worn sprockets can wear a new chain faster and cause rough running. If the teeth are pointed, bent or hooked, a complete chain kit is typically the safest choice.
What does a 520 or 428 conversion mean?
The chain and sprockets are changed to a different chain size than the original. That is why all parts must be replaced at the same time. What this means for weight and wear depends on the specific kit and vehicle.
Does a different number of teeth affect the speedometer and roadworthiness inspection?
Changed gearing can make the speedometer read differently, depending on where the speed is measured. Whether the change matters at inspection depends on the product and vehicle, so check this for the specific part number.