0

Velocity Stacks & Scoops

Does your intake lack a smooth entry so the air flows calmly into the pipe? A velocity stack – a funnel with a rounded bell mouth – can reduce turbulence at the inlet. We carry stacks in aluminium and composite as well as universal intake kits for your intake project.

What does a velocity stack do?

Air drawn in over a sharp pipe edge can form vortices, making the effective opening smaller. The rounded mouth guides the air evenly into the pipe, which can give a more stable airflow. How much this matters in practice depends on the engine, the intake design and other modifications. If you are looking for a complete solution, you can also browse complete air filter kits or bases and lids for air filter housings.

How to choose a velocity stack

  • Throat diameter: Must match your pipe or coupler. For example, BLOX Racing and Vibrant offer sizes from 2.5 to 5 inches.
  • Material: Aluminium is dimensionally stable and withstands high heat, while composite typically transfers less heat to the intake air.
  • Space: The mouth diameter, e.g. 6 to 8.75 inches at Vibrant, requires space in the engine bay – also for a filter, if used.
  • Mounting: Skunk2 Racing, for example, offers kits with a 3.5-inch coupler and mounting ring as well as an air stack kit with filter.

An open stack without a filter can let dirt into the engine, so as a rule use a filter. Check the seal and hose clamps after installation, and keep the filter clean. In this category you will also find parts from aFe and Ticon.

Frequently asked questions

Should I choose an aluminium or composite velocity stack?

It depends on the location and the project. Aluminium is dimensionally stable and withstands high heat, while composite typically transfers less heat from the engine bay to the air. Also check the fit and mounting options for the specific stack.

How do I find the right size?

Measure the inside diameter of the coupler or pipe the stack will be mounted in, and compare it with the outside throat diameter stated in the product name, e.g. 3 or 3.5 inches. Remember to allow space for the mouth and a filter, if used.

Can a velocity stack affect inspection and road legality?

It depends on the product, the car and the rest of the intake, e.g. whether the modification affects noise or emissions. Check the requirements and any documentation for the specific part number before the car goes in for inspection.

View as Grid List
Sort by
Display per page

AL VELOCITY STACKS

vib10953
Vibrant Bellmouth Velocity Stack Aluminum (4in Neck O.D. 7in Bellmouth O.D.)
$541.51 excl. VAT

AL VELOCITY STACKS

vib10951
Vibrant Bellmouth Velocity Stack Aluminum (3in Neck O.D. 6in Bellmouth O.D.)
$456.68 excl. VAT

AL VELOCITY STACKS

vib10952
Vibrant Bellmouth Velocity Stack Aluminum (3.5in Neck O.D. 6in Bellmouth O.D.)
$456.68 excl. VAT

AL VELOCITY STACKS

vib10954
Vibrant Bellmouth Velocity Stack Aluminum (5in Neck O.D. 8.75in Bellmouth O.D.)
$736.87 excl. VAT