Ignition Switches
Do you turn the key and nothing happens, or does the power cut out while you're riding? A worn ignition switch may be the cause. In this category, we have gathered ignition switches from QuadBoss that replace original parts for e.g. Polaris, Arctic Cat and Suzuki.
What does an ignition switch do?
The ignition switch makes and breaks the power to the ignition system and typically also to other electrical circuits, depending on the vehicle. If the internal contact surfaces are worn or corroded, it can cause cut-outs, hard starting or power that drops out with vibration. However, the fault can also lie in the wiring and connectors, so it pays to check them and the other ignition components before replacing anything. If there is power but no spark, the cause may instead be an ignition coil or an ignition module.
How to choose the right ignition switch
Fitment decides the choice, and it depends on the specific vehicle and its model year:
- OEM number: Many products from QuadBoss list the original numbers they replace, e.g. 37110-38F00 or 5ND-82510-00-00. Compare with the number on your old switch or in the parts catalogue.
- Model: Other products are listed by model, e.g. Polaris General, Ranger, RZR, Sportsman or Scrambler. Check that your exact version and model year are covered.
- Connector and wires: Compare the connector shape and the number of wires with the switch you are removing.
Installation and maintenance
Disconnect the battery before installation, and make sure the connector clicks fully into place and is clean and dry. If the vehicle is often used in water and damp conditions, a little contact spray in the connector can help counteract corrosion and thus new cut-outs.
Frequently asked questions
How do I find out which ignition switch fits?
Compare the OEM number on your original switch with the numbers in the product name, or choose by model. Also check that the connector and number of wires match the old switch, as this can vary between versions and model years.
How can I tell if the ignition switch is faulty?
Typical signs are power that disappears when you touch the key, or no power in the on position. Ideally, test continuity with a multimeter, and check the wiring and connectors before concluding that the switch is to blame.
Can I replace the ignition switch myself?
Often yes, if the switch is connected with a plug. Disconnect the battery first, note the positions, and make sure the connector is fully seated. How easy it is depends on the vehicle and where the switch is mounted.