0

Speedometers & Tachometers

Is your speedometer reading incorrectly after switching to different tyres or a different gear ratio, or are you missing a tachometer that is easy to read while driving? In this category, we bring together speedometers, tachometers and speedometer drive gears for you who want accurate readings in a project or a conversion.

What do a tachometer and a speedometer do?

A tachometer shows the engine speed, so you can shift gears at the right moment and keep an eye on the engine under load. A speedometer shows the vehicle speed, and with a mechanical speedometer drive the reading depends on the gear that drives the speedometer cable. If you change tyre size or gear ratio, the reading can typically become inaccurate. You will find the gauges in the subcategories tachometers and speedometers.

How to choose a tachometer

From AutoMeter you will find, for example, the American Platinum, GT Series, Z-Series, Ultra-Lite and Stack Sport series. Consider several factors at the same time:

  • Measuring range: the scale should match the engine's rev range, e.g. 4,000, 7,000, 8,000 or 10,000 rpm. An unnecessarily wide scale can make the reading less precise.
  • Diameter: e.g. 2-1/16, 2-5/8 or 3-3/8 inches or 88 mm. The size affects both the space required and how easy the numbers are to read.
  • Mounting: built into the dashboard or pedestal-mounted, so the gauge can be placed close to your line of sight.
  • Signal: check that the gauge can work with the rpm signal your ignition or engine management system provides.

If you want a clear indication of the shift point, shift and warning lights can complement the tachometer.

Speedometer drive gears and installation

The gears from Rugged Ridge are available with different numbers of teeth, e.g. 29, 30, 35, 37 and 41, and in a long and a short version. The correct number of teeth depends on tyre diameter, gear ratio and the drive your car has, so check the calculation or the chart for your car before you order. Then check the reading against GPS or a measured distance. Mounts and installation parts can be found under gauge accessories.

Frequently asked questions

Why does the speedometer read incorrectly after changing tyres?

Larger or smaller tyres change how far the car travels per wheel revolution. With a mechanical speedometer drive, the reading can therefore be off, and a gear with a different number of teeth can typically correct it. Always check the result after installation.

Which measuring range should I choose for the tachometer?

Choose a scale that covers the engine's maximum rpm with a little margin. A scale far above the engine's range gives more tightly spaced numbers and can make the reading less precise, while a scale that is too narrow will not show the full range.

What is the difference between dashboard mounting and pedestal mounting?

A built-in gauge sits in a hole in the dashboard or a panel. A pedestal-mounted model is mounted on top of the dashboard and can be placed close to your line of sight, which can make it easier to read while driving.

Does a new speedometer need to be approved for the vehicle inspection?

It depends on the gauge and the car. A speedometer must show the speed correctly, so check the requirements and any approval for the specific part number and your car before you install it.

View as Grid List
Sort by
Display per page

2" TACH, 7,000 RPM, ELEC SILVER

atm1994
AutoMeter American Platinum 2-1/16in 7K RPM In-Dash Tachometer Gauge
$1,656.73 excl. VAT

3-3/8" TACH, 8,000 RPM, IN-DASH, ELEC

atm3991
Autometer Sport-Comp 3-3/8 inch 8000 RPM Electronic In Dash Tach
$1,756.89 excl. VAT

5" TACH 10K RPM SHIFT- LITE 1&2 PULSE

atm19265
Autometer Pro-Cycle Gauge Tach 5in 10K Rpm Shift- Lite 2&4 Cylinder White Fat Tach
$3,684.31 excl. VAT

125mm ACTION REPLAY TACH 0-10,000 RPM

atmST430-010
Autometer Stack Professional Action Replay 125mm 0-10K RPM Tachometer - Black
$7,869.21 excl. VAT