Studs
Do you often take the oil pan or carburetor off during your project? Studs can protect the threads in the block and intake, because the nut – not the threads in the material itself – takes the wear each time the part is removed. This category contains kits for oil pans and carburetors.
What studs do on oil pans and carburetors
A stud is screwed into the block or intake and stays in place while the part is lifted on and off over the studs. This can reduce wear on the threads, especially in aluminium, and typically makes it easier to position the gasket and oil pan correctly during installation. Among our studs you will find, for example, oil pan kits for GM LS with fabricated aluminium oil pan, GM Gen V LT and Toyota 1JZ/2JZ, as well as a range of carburetor kits.
How to choose the right kit
- Engine and oil pan: Some kits are made for a specific oil pan – e.g. the Toyota 1JZ/2JZ kit, which is listed for P/N 20947 – so check the part number.
- Thread and length: Carburetor kits are available, for example, in 5/16in-24 with lengths from 1.625in to 3.5in. The right length depends on the flange thickness, any spacer and the gaskets.
- Nut type: Several kits come with 12-point nuts, which can be easier to access in tight spaces.
- Extra parts: Some kits combine two lengths and include a bracket, and there is, for example, a bullet nose kit for a 1/2in flange with 2in spacer.
All kits in this category are from Moroso. Tighten according to the engine manufacturer's instructions, and check for leaks once the engine has been warm for the first time. You can also find other variants under studs and stud kits.
Frequently asked questions
Why use studs instead of regular bolts on the oil pan?
The stud stays in the block, so the threads in the material are not worn every time the oil pan is removed. This can be a particular advantage with aluminium parts and on engines that are often taken apart during a project.
How do I find the right length for carburetor studs?
Measure the total thickness of the carburetor flange, spacer and gaskets, and allow room for the washer and nut. The kits are available, for example, in 5/16in-24 in several lengths, and some combine two lengths in the same kit.
Does an oil pan kit fit all oil pans on my engine?
Not necessarily. Some kits are made for a specific type of oil pan, e.g. GM LS with fabricated aluminium oil pan or Toyota 1JZ/2JZ for P/N 20947. Check the product description for the specific part number.