Thermostats
Is your engine running too cold, getting too hot, or do you want to switch to a thermostat with a different opening temperature? We bring together OE-type and high flow thermostats as well as bypass units – for you who need to repair or adapt your cooling system.
What the thermostat controls
The thermostat keeps the coolant in the engine until a certain temperature is reached and then gradually opens towards the radiator. If it sticks open, warm-up can take longer and fuel consumption can rise; if it fails to open, it can lead to overheating. In addition to standard thermostats from e.g. Gates and Mishimoto, the category includes bypass units such as BD Diesel's solution for 68RFE/Aisin AS69RC transmissions in the Dodge Ram 6.7L.
How to choose a thermostat
- Opening temperature: typically stated in the product name, e.g. 180, 195 or 203 degrees – check whether the figure is in Fahrenheit or Celsius. A lower value can reduce the operating temperature, but the effect depends on the radiator, fan and engine management.
- Flow: a high flow version such as Edelbrock's 54 mm thermostat is built for greater throughput, while an OE-type such as the Gates thermostat for the Dodge Ram 5.7L V8 follows the original specification.
- Fitment: diameter, gasket and housing design must match the engine. Always check the part number against your car.
Other brands in the category include OMIX, QuadBoss and Granatelli Motor Sports.
Installation and maintenance
Typically replace the gasket at the same time and inspect the housing for cracks and corrosion – you will find new ones under thermostat housings. Bleed the cooling system thoroughly afterwards, as air pockets can cause incorrect temperature readings and local overheating. See also coolant filler necks and the full category of thermostats, housings and fillers.
Frequently asked questions
Can I use a thermostat with a lower opening temperature?
Often, but it depends on the engine. The engine management may detect too low a temperature and set a fault code, and an engine that runs too cold can increase fuel consumption and wear. Choose based on what your car and your project require.
How can I tell that the thermostat is faulty?
Typical signs are a temperature gauge that reads low or fluctuates, weak cabin heat or an engine that gets too hot. The symptoms can also be caused by air in the system, a low coolant level or a faulty sensor.
Should the gasket be replaced along with the thermostat?
Typically yes, as an old gasket or O-ring may have hardened and cause leaks. Some thermostats come with a gasket, others do not – check the product description for the specific part number.