0

Alloy Wheels

Looking for wheels with the right ET offset and a bolt pattern that matches your hub exactly? In this category we bring together flow-formed and cast alloy wheels for street cars, track days and projects where weight, strength and looks all matter.

Flow-formed or cast alloy wheels

Cast alloy wheels are made by pouring aluminium into a mould. On flow-formed alloy wheels, the barrel is then rolled out under pressure and heat. This typically results in a denser material structure and can make the wheel lighter than a comparable cast model. Flow-formed wheels here include models from Konig and APR, and the category also contains wheels from ICON and Ridler Wheels. If weight is critical for your project, forged wheels may also be worth comparing.

How to choose the right size

  • Bolt pattern: must match the hub exactly, e.g. 5x112, 5x114.3 or 6x5.5.
  • Centre bore: e.g. 66.5 mm. If it is larger than the hub, hub-centric rings can typically be used, depending on the wheel and car.
  • ET offset or backspacing: determines how far out the wheel sits – in this category from ET18 to ET45 – and thus the clearance to struts, brakes and fenders.
  • Diameter and width: must suit both the tyre size and the brake system. A wider wheel often also requires a different ET offset.

Fitting, inspection and maintenance

Tighten wheel nuts or wheel bolts with a torque wrench to the car's specification, and re-torque after the first few kilometres. Whether the wheel can be approved for road use depends on size, load rating and the specific car, so check this for the individual part number. Clean with an acid-free cleaner, especially on matte and satin finishes, where harsh chemicals can leave stains. Under wheels you will also find the other wheel types.

Frequently asked questions

What is the difference between ET offset and backspacing?

ET is the distance in millimetres from the wheel's centreline to the mounting surface against the hub. Backspacing is measured in inches from the mounting surface to the inner edge of the wheel. Both describe where the wheel sits in the wheel arch, just measured in different ways.

Can I use a wheel with a larger centre bore than the hub?

Typically yes, if you fit hub-centric rings that match both the wheel's centre bore and the hub diameter. The rings centre the wheel and can reduce vibrations. Whether it is possible depends on the specific wheel and car.

Can new alloy wheels cause problems at the vehicle inspection?

It depends on the wheel's size, ET offset, load rating and the specific car. A changed track width or tyres protruding beyond the fender can lead to a remark. Check the approval for the individual part number, and feel free to ask the inspection centre in advance.

View as Grid List
Sort by
Display per page

APR A02 FF 19X85 ET45 SILVER

aprWHL00024
APR A02 Flow Formed - 19x8.5 - 5x112 - ET45 - 66.5mm Center Bore - Hyper Silver Wheel
$4,368.49 excl. VAT

23618909066SB

ico23618909066SB
ICON Alloy Recon Pro - 18X9 / 6X5.5 / 40MM / 6.6in. BS - Satin Black
$5,452.51 excl. VAT

3618909066GB

ico3618909066GB
ICON Alloy Recon SLX - 18x9 / 6x5.5 BP / 40mm Offset / 6.6in. BS - Gloss Black
$4,647.81 excl. VAT

A01 FF 19X85 ET45 SILVER

aprWHL00001
APR A01 Flow Formed - 19x8.5 - 5x112 - ET45 - 66.5mm Center Bore - Hyper Silver Wheel
$4,377.33 excl. VAT