0

Driveshafts

Does your car vibrate at high speed, or has the engine gained so much power that the original driveshaft has become the weak link? In this category you will find driveshafts in aluminium, carbon fibre, chromoly and steel for rear-wheel and all-wheel drive cars – for street cars, track days and motorsport.

What the driveshaft does, and why the material matters

The driveshaft transfers power from the gearbox to the differential. A lighter shaft can typically reduce rotating mass, and a stiff construction can reduce vibrations at high speed, but the result depends on the car and the shaft length. The range includes shafts in aluminium, carbon fibre, chromoly and steel, both with CV joints and with U-joints. The joints and yokes are also available separately under U-joints for driveshafts and driveshaft yokes.

How to choose a driveshaft

  • Fitment: The shafts are typically made for a specific car, gearbox and body version, e.g. Ford Mustang V6 with manual or automatic gearbox or Ford F150 4WD Regular Cab Short Bed. Also check the flange type, e.g. 3-bolt.
  • Power rating: Several products state a power limit, e.g. 900 or 950 hp. Choose based on the car's actual power and use, not just the number.
  • Material and tube diameter: The diameter, e.g. 3, 3.5 or 4 inches, affects stiffness and clearance under the car. It is the combination that decides the choice.
  • Conversion: For engine or gearbox swaps or CV conversions, e.g. the kit for Datsun 510 / 240Z with R180 differential, a dedicated solution is typically required.

Installation and maintenance

The shaft must be installed with correct angles and tightening torques. Watch out for vibrations, clunks when getting on and off the throttle and cracked boots on CV joints; you will find new ones under CV boot kits. With independent suspension, it is often CV axles you need for the wheels. Brands in the category include Driveshaft Shop, ISR Performance and OMIX.

Frequently asked questions

What is the difference between aluminium, carbon fibre and chromoly driveshafts?

The difference lies in weight, stiffness and strength. Aluminium and carbon fibre are typically lighter than steel, while chromoly can be chosen for high loads. The right choice depends on power, tube diameter and how the car is used.

What does it mean that a driveshaft is 1-piece?

A 1-piece shaft can replace an original multi-piece shaft with a centre support bearing. This eliminates the centre bearing as a wear part, but the shaft must be designed for the exact length and angles of the car.

Does the car need an inspection after replacing the driveshaft?

It depends on the product, the car and any other modifications, e.g. engine or gearbox swaps. Check the requirements and documentation for the specific part number before driving the car on the road.

View as Grid List
Sort by
Display per page