0

Handbrakes & Parking Brakes

Does your handbrake pull to one side, or does the car no longer hold on a hill? In this category we bring together cables, brake shoes and drift buttons for the parking brake. It is for you if you maintain an everyday car, restore an older vehicle or build a drift project.

Cables, brake shoes and drift buttons

The parking brake has to keep the vehicle stationary. On most cars this is done via a cable from the lever to the rear brakes. Under parking brake cables you will find, for example, front and rear cables from OMIX for Jeep CJ models as well as rear cables from QuadBoss for ATVs such as the Honda TRX. Parking brake shoes can sit in a small drum inside the rear disc. Here we have, for example, shoes from PowerStop for the Chevrolet Avalanche and Dodge Durango. The buttons from NRG replace the release button on the handbrake lever so that the lever does not lock. It is a choice for drifting, e.g. for the Toyota 86, Subaru WRX/STI, Mazda and Lexus.

How to choose a cable or brake shoes

Fitment is the most important thing. So check the part number against your vehicle, and pay particular attention to:

  • Model year and model – many cables and shoes only fit a specific range of model years.
  • Position and side – cables are available, for example, as a front cable and as a left or right rear cable.
  • Rear brake type – which shoes fit depends on whether the car has drum brakes or disc brakes with a drum in the hat.
  • Lever design – a drift button must fit your specific handbrake lever.

Installation, adjustment and inspection

A cable that rusts or seizes in its sheath can make the handbrake pull to one side or not release fully. If you replace the shoes, the parking brake typically needs to be adjusted afterwards so that both sides engage evenly. Also check that the cable is clear of the exhaust and suspension. Whether modifications such as a drift button are legal for road use depends on the product and the car. Check this for the specific part number before the car goes for its roadworthiness inspection. You will find the rest of the brake system under brake systems, e.g. parts from Baer Brakes.

Frequently asked questions

How do I know if the handbrake cable needs replacing?

Typical signs are that the lever has to be pulled up a long way, that the brake does not hold on a hill, or that it does not release fully. This can be caused by a stretched or rusty cable, but also by worn shoes or lack of adjustment.

Should I replace both rear cables at once?

It is not always necessary. However, if one cable is rusty, the other is often in the same condition. If you replace both, it typically becomes easier to adjust so that both sides brake evenly.

What does a drift button on the handbrake lever do?

It replaces the original release button so that the lever does not lock in the pulled position. This makes it easier to use the handbrake briefly when driving on track. Whether it is permitted on the road depends on the product and the car.

Why are there drum shoes behind a disc brake?

On some cars the parking brake is a small drum brake inside the hat of the rear disc. The shoes are only used for the parking brake and therefore typically wear slowly. However, they can rust in place if the handbrake is rarely used.

View as Grid List
Sort by
Display per page