Fuel Pump Mounting Kits
Can your stock pump no longer keep up with the power in your build, or do you need two or three pumps in the tank? Mounting kits and fuel hats – the tank cover that carries the pumps – let you fit stronger or multiple pumps in the tank in a clean and leak-free way.
What does a fuel pump mounting kit do?
A fuel hat is the top of the pump assembly in the tank. It holds the pumps in place, routes fuel and power out through the tank and seals the opening. Snow Performance, for example, offers fuel hats in standard and high output versions for two or three pumps, while DeatschWerks has set up kits for mounting a single pump. The category also includes parts from Walbro. You will find the pumps themselves under fuel pumps.
How to choose a fuel hat or pump kit
The right choice depends on more factors than pump capacity alone:
- Car and model year: The parts are typically made for specific models, e.g. several generations of Chevrolet Camaro as well as Corvette, so the fitment must match your exact car.
- Number of pumps: Two or three pumps can deliver more flow, but the need depends on your power target and fuel type.
- Pump type: Some fuel hats are built for specific pumps, so check which pumps the specific part number is intended for.
- The rest of the system: Lines, injectors and the fuel pressure regulator must be able to handle the extra flow.
Installation and maintenance
Work with a nearly empty tank, good ventilation and no sources of sparks. Use new gaskets, and check for leaks and fuel odour after installation. It is a good idea to replace the pump strainer at the same time, as a clogged strainer can cause low fuel pressure. If you prefer a complete unit, a fuel pump module can be an alternative.
Frequently asked questions
When do I need two or three pumps in the tank?
It depends on your power target, fuel type and how much each individual pump can deliver. Ethanol-based fuel typically requires more flow than petrol at the same power, so multiple pumps may become necessary.
Can I use my own pumps in a new fuel hat?
It depends on the specific fuel hat. Some are built for specific pumps, so check the product description for which pumps and which mounting the part number is intended for before you order.
Does the electrical system need upgrading when fitting more pumps?
Often, yes. More pumps draw more current, so wire gauge, relays and fuses must be able to handle the load. An undersized electrical system can cause voltage drop and therefore lower pump output.