Flat Washers
Is your fender edge loose, or does a bolt need a wider contact surface against sheet metal and plastic? Flat washers spread the pressure from the bolt head and nut so the material is less likely to deform. This category includes both individual washers in inch sizes and fender washer kits with rivets for plastic or metal.
Fender washers and flat washers
A flat washer sits between the bolt head or nut and the workpiece and spreads the clamping force over a larger area. This can reduce the risk of plastic cracking or thin sheet metal buckling when you tighten. From NRG we carry fender washer kits – large washers for e.g. fender edges and trim panels – in versions for plastic and for metal, some with colour-matched M6 or M8 rivet nuts and in colours such as black, blue, green, red and silver. From S&S Cycle we carry individual washers specified in inches, e.g. .323 x .625 x .020 in in a 10-pack and .375 x .875 x .146 in.
How to choose the right washer
- Inner diameter: should fit the bolt with a little clearance; a hole that is too large gives less contact and can let the washer shift.
- Outer diameter: soft or thin material typically needs a larger contact surface than solid metal.
- Thickness: a thin washer can bend under high tightening torque, while a thick one takes up more space and may require a longer bolt.
- Substrate: choose a kit for plastic or metal according to the part you are mounting on.
If you need other washer types for your project, you will find them under washers. During inspection, it is worth checking whether washers on vibrating plastic parts still sit flat and secure.
Frequently asked questions
What is the difference between fender washer kits for plastic and for metal?
NRG's kits are available in versions for plastic and for metal, with rivets adapted to the substrate. Choose according to the material the washer will sit on, and check that the hole size in the part matches the rivet.
How do I read the dimensions of a washer specified in inches?
Dimensions such as .323 x .625 x .020 in typically indicate inner diameter, outer diameter and thickness. Converted, this corresponds to approx. 8.2 mm, 15.9 mm and 0.5 mm (1 inch = 25.4 mm).
Can I use an inch-size washer with a metric bolt?
Often yes, if the inner diameter gives the bolt a little clearance without excessive play. A washer with an approx. 8.2 mm hole can, for example, typically be used for M8. Too much play can cause uneven loading.