Cam Gears
Do you want to advance or retard your cam timing by a few degrees after a camshaft swap or a boost increase? Adjustable cam gears let you fine-tune valve timing on engines from Honda, Subaru, Toyota and Mitsubishi, for example, and are made for you if you're building up an engine as part of a bigger project.
What adjustable cam gears do
The cam gear transfers motion from the crankshaft to the camshaft. On an adjustable gear, the hub can be rotated relative to the toothed outer ring, so you can change when the valves open and close. This is typically used to move the engine's power higher or lower in the rev range. The effect depends on the cam profile, the engine and other modifications, so adjustments should be made methodically, ideally on a dyno. The gears belong to camshafts and valvetrain and are especially relevant when you change camshafts.
How to choose cam gears
- Engine code: The gears are engine-specific, e.g. for the Honda D, H and K series, Subaru EJ205/EJ257, Toyota 2JZGTE and Nissan RB26DETT. Check the part number against your engine.
- Intake or exhaust: Some gears only fit one side, such as Brian Crower's gear for the right-hand exhaust cam on the Subaru EJ or Skunk2's exhaust gear for the K series.
- Single gear or set: Twin-cam engines may require two gears, and the Subaru EJ may require four, as in Brian Crower's four-gear set.
- Construction: For example, AEM Tru-Time is CNC-machined from 6061-T6 billet aluminium with laser-etched timing marks.
Brands in this category also include HKS, COMP Cams and S&S Cycle.
Installation and checks
The engine must be set correctly at top dead centre, and the belt or chain must be tensioned according to the engine's specifications. After adjusting, you should check piston-to-valve clearance, especially with aggressive cam profiles or a skimmed cylinder head, as too much offset can cause contact. Tighten the adjustment bolts to the correct torque and inspect the gear when changing the belt. If the belt, tensioner or guides need replacing at the same time, you'll find them under timing components.
Frequently asked questions
How many degrees should I adjust the cam gear?
It depends on the cam profile, the engine and the purpose. Typically, adjustments are made a few degrees at a time and the effect is measured on a dyno. Check valve clearance after every change so the valves and pistons can't hit each other.
Do adjustable cam gears make sense with stock camshafts?
They can, for example after skimming the cylinder head, which can slightly change the timing. The gain depends on the engine and other modifications, and the gear must fit your specific engine code.
Does changed cam timing affect inspections and road approval?
It depends on the car and the overall extent of the modifications. Check the requirements for the specific part number and your car, and be aware that changed engine output may need to be declared and approved.