Transfer Cases & Components
Is your transfer case leaking oil, or does the four-wheel drive pop out of engagement when the terrain gets tough? In this category we gather parts for the case that splits power between the front and rear axle: rebuild kits, gaskets and oil seals, mount kits and skid plates for you who maintain or build an off-road vehicle.
What the transfer case parts do
The transfer case sits behind the transmission and sends power on to the front and rear axle, often with a low range for off-road use. Over time, gaskets, bearings and gears can wear, which can cause noise, oil leaks or problems keeping the gear engaged. Rebuild kits from e.g. OMIX typically combine several wear parts in one kit, while you will find more individual parts under transfer case components. In the category you will also find brands such as Wehrli and Torque Solution.
How to choose the right parts
- Case type: The kits are made for a specific case, e.g. Dana 18 or Dana 20, so check the designation on your case.
- Vehicle and model year: Several OMIX kits are intended for the Jeep CJ from 72-79, and there are also parts for Willys.
- Scope of the job: A gasket and seal kit can be enough for a leak, while internal wear typically requires a complete rebuild kit.
- Protection: Skid plates from e.g. Cali Raised for the Toyota Tacoma 16-23 are available in steel or aluminium and in versions with and without manual transmission. The choice is a trade-off between weight, durability and how your vehicle is built.
Installation and maintenance
A rebuild typically requires the case to be removed from the vehicle and disassembled, so the job calls for tools and experience – or a workshop. Check the mounts at the same time, as worn rubber parts can cause vibrations, and look for play in the driveshafts and yokes sitting right next to the case. Change the oil according to the vehicle's instructions using the oil type specified by the manufacturer. If the noise comes from the axles, the cause may also lie in the differential.
Frequently asked questions
How do I find out which transfer case my vehicle has?
The designation is typically on a tag or cast into the housing, e.g. Dana 18 or Dana 20. Compare it with your vehicle's model and year, and check the product description before you order.
Should I choose a gasket kit or a complete rebuild kit?
If the case is only leaking oil, a gasket and seal kit can be enough. If it is noisy or does not stay in gear, there may be internal wear, and a rebuild kit then typically makes more sense.
Should I choose a steel or aluminium skid plate?
Aluminium is typically lighter, while steel can take more hits. The choice depends on how you drive. Also choose the version that matches whether your vehicle has a manual transmission.
Does a skid plate require approval at inspection?
It depends on the product and the vehicle. Check the rules and any documentation for the specific part number before you fit the plate to a vehicle that needs to pass inspection.