Harmonic Balancers
Do you feel vibrations at high revs, or does the crankshaft need protecting in a build with more power? In this category we bring together crankshaft harmonic balancers, elastomer kits and mounting hardware for you who want to keep torsional vibrations down in a tuned or rebuilt engine.
What does a crankshaft harmonic balancer do?
The crankshaft twists slightly with every combustion event, and at certain rpm these torsional vibrations can amplify each other. A damper on the front end of the crank absorbs some of that energy, so the load on the crankshaft and bearings typically drops. More power, higher revs or lighter rotating parts can change the vibrations, so the original damper is not necessarily right for your project. Under harmonic balancers you will find the dampers themselves, while bolts and other parts are found under harmonic balancer hardware. The brands in this category are ATI and Fluidampr.
How to choose the right damper
- Engine: The damper must fit the specific engine – for example, ATI dampers are available for Honda K20, Nissan VQ35HR and Subaru EJ20, EJ22 and EJ25.
- Diameter and belt grooves: The number of grooves, e.g. 4, 6 or 7, and the diameter must match the drive belt and the rest of the belt system.
- Drive ratio: Some versions make the accessories run slower or faster than stock, e.g. 4 percent underdrive or 7 percent overdrive. This affects the alternator, water pump and power steering pump.
- Use: Power, rev range and whether the car is driven on the street or the track determine which design makes sense.
Installation and maintenance
The damper is installed using the tools and tightening torque specified by the manufacturer, and the bolt may need to be replaced. Check the belt and pulleys at the same time. For ATI dampers, elastomer kits with 2 or 3 rings are available in various combinations, so the rings can be renewed after wear. Inspect elastomer dampers for cracks and displacement between hub and ring, especially after hard use. If you switch to a different crankshaft, the damper should be part of the assessment.
Frequently asked questions
When should the harmonic balancer be replaced?
Cracks, dried-out or protruding rubber, misaligned marks between hub and ring or a belt that runs out of line can be signs of wear. If you increase power or revs significantly, it is also worth assessing the damper.
What does the percentage in the product name mean?
It indicates how much the damper's pulley makes the accessories run slower (underdrive) or faster (overdrive) than stock. A lower drive ratio can affect charging and cooling at idle, so choose based on how the car is used.
Can I reuse the old crank bolt?
It depends on the engine and manufacturer. Some crank bolts are designed for single use and must be replaced during installation. Check the manufacturer's instructions and tightening torque for your specific engine.
What is an elastomer kit?
A set of replacement rings for ATI dampers, available with 2 or 3 rings in various combinations. The kit must match the specific damper, so check the designation on your damper before ordering.