0

Turbo-Back Exhaust Systems

Want to replace the entire exhaust from the turbo outlet back in one complete kit? Turbo-back systems typically include a downpipe, intermediate pipe and muffler or muffler delete pipe. Here you will find kits for the Dodge Cummins 5.9L and Ford F250/F350 7.3L Powerstroke, among others.

What a turbo-back system includes

A turbo-back system replaces the exhaust from the turbo outlet all the way to the tailpipe. It therefore covers more than a cat-back system, which only starts after the catalytic converter, and more than axle-back solutions, which only replace the rear section. You can find the full range of solutions under exhaust systems and kits.

How to choose a turbo-back exhaust

  • Diameter: the kits are available in 4 and 5 inch, for example. A larger diameter can give lower back pressure, but the right choice depends on the engine, turbo, power goals and the space under the vehicle.
  • Material: you can choose between aluminized and stainless steel. Stainless steel typically withstands moisture and road salt better over time.
  • Muffler or delete pipe: a straight pipe in place of the muffler typically gives a louder sound.
  • Fitment: check model year, engine and drivetrain. Some kits from Diamond Eye Performance are, for example, only for four-wheel drive or built for an HX40 turbo.

In addition to Diamond Eye Performance, you will also find Gibson and Magnaflow in this category.

Installation and inspection

Installation typically requires a lift, new gaskets and clamps, and you can find any missing parts among our exhaust installation kits. Retighten the joints after the first few drives. Whether the vehicle can pass inspection with the system depends on the product and the vehicle, so check the approval as well as noise and emissions requirements for the specific part number, especially if the muffler is removed.

Frequently asked questions

What is the difference between a turbo-back and a cat-back system?

A turbo-back system starts at the turbo outlet and typically includes the downpipe, while a cat-back system only starts after the catalytic converter. Turbo-back therefore replaces a larger part of the exhaust, and installation is often more extensive.

Should I choose a kit with a muffler or with a delete pipe?

A delete pipe without a muffler typically gives a louder sound and can affect whether the vehicle meets noise requirements at inspection. What is permitted depends on the vehicle and product, so check it for the specific part number.

Why do some product names mention four-wheel drive or a specific turbo?

The pipe routing depends on the drivetrain, model year and turbo. A kit marked for four-wheel drive or for an HX40 turbo will therefore not necessarily fit other versions. Compare model year, engine and drivetrain with your vehicle.

View as Grid List
Sort by
Display per page

94-02 DODGE 5.9L CMNS 4" AL TBS

depK4212A
Diamond Eye KIT 4in Turbo Back SGL AL: 98.5-02 DODGE CUMMINS 5.9L
$9,943.66 excl. VAT

94-02 DODGE 5.9L CMNS 4" AL TBS-RP

depK4212A-RP
Diamond Eye KIT 4in Turbo Back MFLR RPLCMENT PIPE SGL AL: 98.5 - 02 DODGE CUMMINS 5.9L
$8,680.34 excl. VAT

94-97.5 FORD 7.3L PWSTK 4" AL TBS

depK4306A
Diamond Eye KIT 4in Turbo Back Single AL: 94-97 FORD 7.3L F250/F350 PWRSTROKE NFS W/ CARB EQUIV STDS
$10,088.74 excl. VAT

94-97.5 FORD 7.3L PWSTK 4" AL TBS-RP

depK4306A-RP
Diamond Eye KIT 4in MFLR RPLCMENT PIPE TB SGL ALUM 94-97 5 7 3L F250/F350 PWRSTROKE NFS W CARB STDS
$8,736.51 excl. VAT

94-97.5 FORD 7.3L PWSTK 5" AL TBS-RP

depK5314A-RP
Diamond Eye KIT 5in TB MFLR RPLCMENT PIPE SGL ALUM 94-97 5 7 3L F250/F350 PWRSTROKE NFS W CARB STDS
$9,141.17 excl. VAT