Shift & Warning Lights
Do you spot a critical value in time while your eyes are on the road or the track? A shift light or warning light gives you a clear light signal at, for example, a specific rpm or low oil pressure, so you don't have to read the needles constantly. This category is for you if you want to complement the gauges in your project.
What shift and warning lights do
A shift light typically comes on when the engine reaches a set rpm, so you can shift gear without looking at the tachometer. A warning light switches on when a switch or control signal reports a limit value, e.g. low oil pressure, high temperature or excessive boost pressure. The light itself doesn't measure anything; it displays a signal from a switch, a sensor or a gauge. In the subcategory warning lights you will find, for example, the Hella Warning Light 2Wb.
How to choose the right light
The choice depends on more factors than brightness alone:
- Signal: Can the light be controlled by the signal your sensor, switch or gauge provides?
- Voltage and power consumption: The light must suit the car's electrical system.
- Colour and visibility: The light must be visible in both daylight and darkness without dazzling.
- Mounting: Installation dimensions, mounting hole and placement in your field of view.
Installation and compatibility
Place the light where you can see it without moving your eyes far, e.g. close to your individual gauges or in a panel from gauge panels and kits. If you need a sensor or switch to trigger the warning, you will find them under sensors and sending units. Use the correct fuse and good connections, as a poor ground connection can cause weak or unstable light. Whether an additional light is permitted for road use depends on the product and the car, so check this for the specific part number.
Frequently asked questions
What is the difference between a shift light and a warning light?
A shift light shows that the engine has reached a specific rpm, so you know when to shift gear. A warning light shows that a value such as oil pressure or temperature has passed a limit and that you should react.
Can a warning light work without a sensor or switch?
Typically not. The light only displays a signal and must receive it from a switch, a sensor or a gauge with a warning output. What works together depends on the light and the system you connect it to.
Why does the light glow weakly or flash for no reason?
This can be caused by a poor ground connection, a loose connector or incorrect voltage. A flashing signal can also come from a sensor that is close to the limit value. Check wiring and connections before you replace the light.
Can I install an additional warning light in a road car?
That depends on the product and the car. Place the light so it doesn't dazzle or obscure the car's other indicator lights, and check the requirements and any approval for the specific part number before you install it.
- 1
- 2