Throttle Body Spacers
Want to adjust the path of the air into your engine without replacing the entire intake? A throttle body spacer is fitted between the throttle body and the intake manifold. The parts are made for specific engines and suit you if you want to modify your intake with a smaller job.
What does a throttle body spacer do?
The spacer increases the distance between the throttle body and the intake manifold. Depending on the design, it can affect how the air flows into the manifold, and some models can reduce heat transfer from the engine to the throttle body. Any change in response and power is typically modest and depends on the engine, engine management and other modifications. If you want to change the airflow path more, a different throttle body or a new intake manifold is a bigger job.
How to choose a throttle body spacer
The spacers are vehicle-specific, so start with the model year and engine. The product names state this, e.g. aFe Silver Bullet Throttle Body Spacer for Nissan 350Z with VQ35DE or Airaid PowerAid TB Spacer for Dodge Ram with 5.7 Hemi. Brands in the category also include Torque Solution, Volant and Snow Performance. Also consider:
- Space: The spacer moves the throttle body, so hoses, wiring and intake tubes must still reach.
- Material: Whether the spacer insulates against heat depends on the material.
- Mounting hardware: Check whether gaskets and longer bolts are included.
Installation and maintenance
Installation is typically straightforward. Clean the gasket surfaces, use new gaskets and tighten the bolts evenly. Afterwards, check for vacuum leaks, which can cause a rough idle. If you want to raise the entire manifold instead, there are intake manifold spacers.
Frequently asked questions
Does a throttle body spacer give more power?
It depends on the engine and the design of the spacer. Any change in response or power is typically modest, and the result can vary with engine management and other intake modifications.
Does my car need an inspection after I have fitted a throttle body spacer?
It depends on the product and the car. Check the information for the specific part number, and ask a vehicle inspection centre whether the modification must be registered before you fit the part to a registered car.
Why does the engine idle roughly after installation?
It can be caused by a vacuum leak from a leaking gasket, a hose that is not seated correctly or a loose sensor connector. Check gasket surfaces, bolts and all connections.