0

Storage & Organizers

Are tools, cables and gear rattling around loose in the truck bed, or does your workshop lack proper shelving? In this category we bring together boxes for the pickup bed and underbody as well as folding shelves, so you can keep your work gear organized and close at hand on the job site.

Box types for the bed and under the truck

The boxes are designed for different locations on the vehicle. A crossover box, e.g. the Low Profile Full Lid from the Westin/Brute series, sits across the bed behind the cab and leaves the rest of the bed free. Top siders with lift-up doors mount along the bed rail and give access from the side, while underbody boxes with a drop-down door make use of the space under the bed. For long items there is a conduit carrier – a long holder for e.g. pipes and rods – and for gooseneck hitches a V-shaped box at the tailgate with a drawer and swing doors.

How to choose a tool box

The right choice depends on more than just size:

  • Dimensions: the length is stated in the product name, e.g. 72 or 96 inches. Measure your bed before you choose.
  • Access: consider whether you typically grab gear from the side, from the rear or over the bed rail. LoSider boxes with a rear roll-out drawer can make it easier to reach the innermost items.
  • Side: some boxes come in a driver-side and a passenger-side version.
  • Cargo space and visibility: tall boxes can take up cargo space and rear visibility, while a low profile typically leaves more free space.
  • Finish: bright aluminum or textured black.

Mounting and brackets depend on the box and vehicle, so check what is included with the specific part number.

Shelving and workshop organization

For the workshop or garage there is the Westin Brute Folding Shelf Assembly measuring 60 x 56 inches with 21-inch shelves, which can be folded away when you need the space for something else. Shelves and boxes give a fixed place for hand tools and power tools, and you will find other gear under shop equipment. Keep hinges and doors clean, and regularly check that bolts and brackets are tight – vibrations from driving can loosen them over time.

Frequently asked questions

What is the difference between a crossover box and a top sider?

A crossover box sits across the bed behind the cab and opens with a lid from above. A top sider sits along the side of the bed, where lift-up doors give access from the side without you having to climb into the bed.

How do I find the right length?

Measure the inside length or width of the bed, depending on where the box will sit, and compare it with the dimension in the product name, which is given in inches. Also allow for wheel wells, the tailgate and any hitch.

Why are LoSider boxes available for both the driver and passenger side?

The boxes are designed for a specific side of the bed, e.g. with the roll-out drawer positioned at the rear. If you want boxes on both sides, you therefore need to choose one of each version.

Does a mounted tool box require approval at inspection?

It depends on the box, the vehicle and how it is mounted. Check the requirements for fastening, dimensions and visibility for your specific vehicle and the specific part number before mounting the box.

View as Grid List
Sort by
Display per page