License Plate Mounts
Does your license plate lack a proper place to sit after you have swapped the bumper or fitted a new front end on your project? A license plate mount gives the plate a stable position and makes it easier to keep it visible and straight.
What a license plate mount does
A mount secures the license plate where the original holder no longer fits. This is typically after fitting a different bumper or front accessories. In this category you will find, for example, the LicenseMount from Fishbone Offroad. If you only need a border around the plate itself, see our license plate frames. Under license plates and accessories you will find the whole range in one place.
How to choose a license plate mount
- Position: Check where the mount is to be fitted and that there is a hole pattern or room for bolts on the bumper or frame.
- Visibility: The plate must be clearly visible and must not be covered by lights, a tow hitch or other equipment.
- Lighting: At the rear there typically needs to be room for the license plate light.
- Rigidity: A rigid mount and correctly tightened bolts can reduce vibrations, especially when driving off-road.
Whether the position can be approved at inspection depends on the product and the car, so check the rules for your specific installation.
Frequently asked questions
What is the difference between a license plate mount and a license plate frame?
A mount is the part that secures the plate to the car, for example when the original position is gone. A frame sits around the plate itself and mainly works as a border. Some projects require both.
Can a relocated license plate mount cause problems at inspection?
It can. Whether the position is approved depends on the product and the car. The plate typically has to sit visibly and straight without being covered, and at the rear it must be possible to illuminate it. Check the rules for your specific installation.
What should I keep an eye on after installation?
Retighten the bolts after the first few drives, especially if you drive off-road where vibrations can loosen them. Also check regularly that the plate sits straight and that mud or snow does not cover it.