Sending Units
Does your gauge suddenly read zero, or does the needle fluctuate for no reason? The sending unit typically sits on the engine and converts pressure into an electrical signal. Here we collect sending units for you who want to measure oil pressure accurately – for new gauges or as a replacement.
What does a sending unit do?
A sending unit measures, for example, oil pressure and sends a signal to a gauge in the cabin. In the subcategory pressure senders you will find, among other things, a replacement 100 psi oil pressure sender. The sender has to work together with the gauge, so also take a look at individual gauges and gauge panels and kits.
How to choose the right sending unit
The sender and gauge must match, otherwise the reading can be incorrect. So check:
- Measuring range: the sender's range, e.g. 100 psi, should correspond to the gauge's scale.
- Signal and resistance: must match what the gauge expects, and this depends on the manufacturer and series.
- Thread and location: the thread must fit the port on the engine, otherwise an adapter may be necessary.
In this category you will find, among others, the brand AutoMeter. Always compare the sender's specifications with the gauge's documentation. Adapters and other mounting parts can be found under gauge accessories.
Frequently asked questions
Can I use any sending unit with my oil pressure gauge?
Not necessarily. The sender's signal and measuring range must match the gauge, otherwise the reading can be incorrect. Check the specifications for the specific part number before choosing a sender.
Why does my gauge show incorrect or fluctuating oil pressure?
It can be caused by a faulty sender, a poor ground connection, loose wires or a sender that does not match the gauge. It can also be a genuine pressure problem, so it is a good idea to check with a mechanical pressure gauge.
How do I install a new sending unit?
The sender is typically screwed into an oil pressure port on the engine, possibly with an adapter. Only use the thread sealant recommended by the manufacturer, as the sender often grounds through the thread. Then test for leaks and correct readings.