Lowering Kits
Does your car sit too high in the wheel arches, or do you want a lower centre of gravity in your project? Lowering kits give you a lower ride height with parts tailored to specific vehicles – from complete kits to lowering links and solutions for rear axles and front forks.
Different ways to lower
The category covers several principles. Some kits combine shorter springs with matched shock absorbers, e.g. for the BMW M4 Cabrio and Audi TT, so the damping suits the lower height. Lowering links, such as BLOX Racing Lowering Links for the Tesla Model S/X, typically lower the car via the suspension linkage instead of new springs. Ridetech offers an axle flip kit for the rear axle of the Ford F150, and Burly Brand has lowering kits for both the rear end and the front fork. Among the brands you will also find Bilstein, QA1 and Maxtrac. If you want to be able to adjust the height as you go, coilover kits can be an alternative.
How to choose a lowering kit
- Amount of drop: The lower you go, the less suspension travel and the greater the risk of the shock bottoming out or the tyre hitting the wheel arch.
- Dampers: Stock dampers are not always designed for shorter springs, so consider suitable shock absorbers.
- Geometry: A lower ride height can change camber and toe; adjustable control arms can help correct it.
- Use: Daily driving places different demands on comfort and ground clearance than track days.
Fitting and inspection
Check that the kit fits your exact model and drivetrain – there are, for example, separate versions for 4WD. After fitting, the wheel alignment should be measured and adjusted. Whether the car can pass inspection when lowered depends on the product and the car, so check the documentation for the specific part number. You will find more chassis parts under suspension components.
Frequently asked questions
Do I need to replace the shock absorbers when I lower my car?
It depends on the kit and the amount of drop. With shorter springs, stock dampers can operate outside their normal stroke, which can result in poorer road holding and faster wear. Complete kits with springs and dampers take this into account.
Can a lowered car pass inspection?
It depends on the product, the car and the amount of drop. Check the documentation for the specific part number, and pay attention to ground clearance, tyre clearance and headlight height, which are typically assessed at inspection.
Why does the wheel alignment need adjusting after lowering?
A lower ride height typically changes camber and toe. Without adjustment, the tyres can wear unevenly and the car can pull or feel unsettled. So have the wheel alignment measured and adjusted once the kit is fitted and has settled.