Trailer Wiring Harnesses
Do you need the turn signals and brake lights on your trailer to follow your vehicle exactly? In this category we bring together wiring harnesses, adapters, relays and modules that connect your vehicle's lighting system to the trailer plug. These parts are for you if you want to wire your trailer lights correctly from the start or fix faults in an existing setup.
4 or 5 wires – how the signals match up
In a 5-wire system, the turn signals and brake lights typically each have their own wire, while many trailers use 4 wires, where turn and brake share a signal. If the vehicle and trailer don't match, a converter such as the Kuryakyn 5 To 4 Wire Trailer Harness Converter can combine the signals. A harness with a relay, e.g. the Kuryakyn Plug & Play Trailer Wiring & Relay Harness for Honda GL1800 01-10, can relieve the vehicle's own lighting system, because the trailer lights are powered via the relay.
How to choose the right wiring harness
- Number of wires: Check both the vehicle's and the trailer's system before choosing a kit or converter.
- Model-specific or universal: A kit for a specific model, e.g. the Kuryakyn Trailer Wiring Kit 5-Wire for Honda 18-22 GL1800, typically requires less modification than a universal kit.
- LED lights: They typically draw less current, which can cause hyper-flashing. An LED flasher relay or load resistors can help, depending on the system.
- Signal distribution: If one signal needs to feed several lights, a splitter module may be necessary.
If you need other connectors or adapters, you'll find them under wiring harnesses and adapters, and the full range from Kuryakyn gathered in one place.
Installation and maintenance
Insulate and moisture-proof all connections, and test the turn signals, brake lights and tail lights before you drive. Weak or flickering lights are often caused by corrosion in the plug. You'll find extra extensions and adapter plugs among our wiring harness adapters.
Frequently asked questions
What is the difference between a 4-wire and a 5-wire trailer plug?
In a 5-wire system, the turn signals and brake lights typically each have their own wire, while a 4-wire system shares the signal. If the vehicle and trailer have different systems, you typically need a converter that combines the signals correctly.
Why do the lights flash too fast after switching to LED?
LED bulbs typically draw less current than incandescent bulbs, and an older flasher relay may interpret this as a blown bulb. An LED flasher relay or load resistors can solve this, depending on the vehicle's system.
Do trailer lights and wiring harnesses need to be approved for inspection?
It depends on the product, vehicle and trailer. The lights must work correctly and meet current requirements, so check the approval and installation requirements for the specific part number before driving on public roads.