0

MAP Sensors

Is your engine idling roughly, or is the check engine light on with a manifold pressure fault code? The MAP sensor measures the pressure in the intake, and here you will find replacements for Jeep Wrangler, Audi/Volkswagen and H-D, as well as sensors for projects running higher boost pressure.

What does a MAP sensor do?

The sensor measures the absolute pressure in the intake manifold and sends the signal to the engine management system, which uses it, among other things, to calculate fuel quantity and ignition timing. An incorrect signal can typically cause rough idling, higher fuel consumption or fault codes. MAP sensors belong to our engine management sensors, while sensors for e.g. oil and fuel pressure can be found under pressure sensors.

How to choose the right MAP sensor

Start with the vehicle and the OEM part number. The sensors from TwinPower, for example, state which H-D part number they replace, while the sensors from OMIX are divided by Jeep Wrangler YJ and TJ. Also pay attention to:

  • Measuring range: a 3 bar sensor can measure higher boost pressure than a standard sensor, but the engine management must be calibrated for that specific sensor.
  • Connector and mounting: check that the connector and fastening match the existing sensor.
  • OEM design: APR, for example, carries an OEM sensor for Audi/Volkswagen.

Frequently asked questions

Can I use a 3 bar MAP sensor without changing the engine management?

Typically not. The sensor gives a different signal at the same pressure than a standard sensor, so the engine management must be calibrated to the new sensor's measuring range. Otherwise, the fuel and ignition calculations can be wrong.

How can I tell if the MAP sensor is faulty?

Rough idling, hesitation under acceleration, higher fuel consumption and a manifold pressure fault code can point to the sensor. However, the same symptoms can be caused by leaking vacuum hoses or connector faults, so check those and read the fault codes first.

Does the MAP sensor need cleaning or maintenance?

Normally it requires no scheduled maintenance, but deposits of oil or soot from the intake can affect the reading. In that case, use a cleaner designed for sensors, and check the connector and seal at the same time.

View as Grid List
Sort by
Display per page

MAP SENSOR BOSCH 3 BAR GOLF

aprZ1002470
APR Audi/Volkswagen OEM Map Sensor
$1,195.30 excl. VAT